|Marerial:||Bronze Graphite Bushing||Size:||Inch Size Bushings|
|Standard Size:||C86300,C86200||Type:||PLUGGED CAST BRONZE|
graphite impregnated bronze bushings,
graphite filled bronze bushes
Self-lubricated bronze bushings that are manufactured with some form of pre lubrication feature Graphite
Standard Bronze Bushing Components for Press Die & Plastic Moulds
Sleeve lube guide | MOLD AND DIE COMPONENTS
The vsb-50 C86300 & C83200 CuZn25Al5 BRONZE is made of exceptionally hard and durable BRONZE, embedded with self-lubricating graphite column pins, maintant-free.This type of bearing is a good choice when it comes to high loads and small movements that are difficult to lubricate.The graphite pin covers about 25-30% of the bearing surface and is positioned so that the entire bearing surface is always lubricated.VIIPLUS sliding elements are available in many designs and can also be manufactured in other alloys to meet specific requirements.
Sleeve Lube Guide Bronze Bushings | Mold And Die Components
Shape and Type
Guide bushing, fixture, half bearing bush,Wear plate, washer, guide plate, etc.
--Long service life
-- for heavy duty applications
-- maintenance-free (self-lubricating)
--Extreme temperature tolerance
The VIIPLUS vsb-50 itself is maintenance-free.However, as an initial step, it is recommended to lubricate the sliding surface during assembly.Common lubricants such as grease or oil can be used.For optimal performance and service life, it is important to thoroughly clean mating surfaces during assembly.
According to the request, may provide or produce each kind of sliding element.
Please contact us for more information.
Hardware, steel manufacturing, stamping die, automotive industry tools,
Bushings for Construction Equipment, Boom Link Bushings for Power Shovels, Toggle Link & Guide Bushings for Injection Mold Machines, Steel Mill Equipment, Furnace Dragouts, Drying Equipment, Roasters, Press Dies, Assembly Lines, Hydro-Electric Structures, Winches, Hoisting Equipment, Tire and Paper Mill Machinery and Many Other Industrial Applications.
Graphite Plugged Bronze Bushings are all self-lubricating and maintenance free. These bushings are machined out of continuous cast bronze and plugged with solid lubricant plugs. A bushing and it's mating surface should always be seperated by a film of lubricant.Many of VIIPLUS’s components use graphite. Here is what you need to know about it. Graphite is ordinary carbon in a highly unusual form, a two-dimensional crystal. Think of it as a one-atom thick sheet. A piece of graphite is a stack-up of these sheets. A graphite pencil lead feels oily because these one-atom thick sheets are very slippery.
Solid self-lubricating bearing with graphite plug insert | Graphite copper sleeve bushings
Inch Sized Bushings
Metric Sized Bushings
C86300 Manganese Bronze
C86300 Typical applications include slow speed heavy duty load bearings, gears, cams and hydraulic cylinder parts.continuous cast manganese bronze is a high strength, non-heat treatable copper alloy intended for use in applications requiring a good combination of outstanding wear characteristics and high bearing strength for heavy loads and slow speeds.
C86300 Maganese Bronze Graphite Bushings
C86200 Maganese Bronze Graphite Bushings
Graphite Plugged Cast Bronze Bushings can be utilized where heavy loads must be supported at low to medium speeds
The Plug Graphite Cast Bronze Bushing is able to withstand high temperatures up to 570 F
The self-lubricating feature allows bearings to be used where oiling is difficult, expensive to implement, and where grease/oil cannot be used. Excellent lubrication is achieved even under high loads at low speeds.
Self lubrication with specially embedded solid lubricants reduces friction. Coefficient of Friction: 0.04 to 0.2
Coefficient o linear expansion
< 0.01 mm
Contact Person: tiffany