|Material:||Bronze +Graphite，Aluminum-Bronze With Solid Lubricant,CuZn25AI5Mn4Fe3||Model Number:||Cylinder Bearings,Cylinder Bearings With Flange|
|Application:||Mediate Load But Higher Temperature And Condition With Mediate Running Velocity Etc.||Type:||FLANGE/SLEEVE/WASHER|
graphite impregnated bronze bushings,
graphite filled bronze bushes
Copper Bearing finished copper alloy bushings provide a simple, economical way to use bearings with high bearing, good corrosion resistance, dimensional processing any of the characteristics. Meanwhile VIIPLUS CHINA can provide different copper alloys according to different conditions, and in accordance with the requirements of processing different forms, it has a higher dimensional accuracy than class copper rolling bearings.
Self-lubricating bearings due to its free maintenance characteristics and under the condition of dust and outdoor characteristics such as good abrasion resistance, therefore widely used in agricultural machinery industry, such as combine harvester, planter, banding machine, grinder, tractors and other oil cylinder, suspension system, such as joints can't come on or it is difficult to form the part of the oil film.
The bearing, housing and fitting tools must be kept clean during fitting. Please give special notice to us if you adopt the soft material for housing produce. To make fitting easy. the shaft ends should be chamfered.
Bearing forms available in standard dimensions
· Cylindrical bushes
· Flanged bushes
· Sliding plates
Bearing forms made to order: standard forms in special dimensions, thrust washers, flanged thrust washers, half-bearings, special shapes obtained by stamping or deep drawing, customized bearing designs
In agricultural equipment, bearings are subject to friction and wear during edge and boundary lubrication.Our bearings provide more reliable performance than copper bearings, with up to 620Mpa load capacity, protection shaft or pin will not wear, with good corrosion resistance, shock resistance and edge load capacity.
Avoiding the use of grease to reduce maintenance of self-lubricated bearings is the ideal choice for applications requiring a longer service life. Maintenance is free in the case of insufficient or non-lubricated operation.
Improve performance and extend service life
Excellent low friction performance
With best solutions or any problem in self lubricatng bearings in THRUST WHEEL Bushings
The C86300 BRONZE GRAPHITE BUSHINGS slide bearing is made from solid bronze/iron material.it is ideally suited for highly demanding applications in tough environments. We offer a standard assortment of plain sleeve bushings, flanged bushings and sliding plates.
The solid bronze body can be drilled holes and filled solid graphite lubricant, in this way it can be used in oilless environments. Also the solid bronze body can be machined oil grooves and holes, it can get better lubricating after filled with grease.
Solid Bronze bushings and plates are made completely of tin bronze, CuSn10P, which has very good machine ability. All surfaces of the solid bronze bushings are machined.
Solid iron bushings and plates are made in same way of bronze material, but it is much lower costs if you are not in high performance requirements.
• Construction machinery
• Transport equipment
• Pulp and papermaking machinery
• Off-shore equipment
Why choose C86300 BRONZE GRAPHITE BUSHINGS slide bearing?
• Insensitive to dirty environment
• Resistant to shock loads and vibrations at slow speeds
• Enable operation with a poor shaft surface finish
• Good resistance to corrosive conditions
VSB-50 Solid Bronze Metallic Self-lubricating Bearings
Cast Bronze Bearing with Graphite Plugs
Structure Characteristics and Applications
VSB-50 Solid Lubricating Bearing is produced by strengthening brass that has good physical performance and good capability for casting. What's more, the brass material has pretty good anti-erosion abitity in air, fresh water and sea water. The surface is regularly and finely machined with sockets in which particular solid lubricant is filled. The product is widely used on consecutive casting and rolling machines, mine-exploiting equipments, ships, steam engine, etc.
Solid Lubricant Casting Aluminum Bronze Bearings Bushings
VSB-50 SOLID LUBRICANT SLIDING BEARINGS material is made of strong cast bronze based metal with special solid lubricants embedded. The base metal withstands high load and the solid lubricants provide self-lubrication. The bearing shows excellent performance without pre-lubrication under conditions of extreme high/low temperature with low speed. This material provides a maintenance-free bearing solution, particularly for high load, intermittent of oscillating motion.
Coefficient o linear expansion
< 0.01 mm
CUSTOMER BRONZE BUSHINGS SIZE
START YOUR PROJECT WITH AN APPLICATION ENGINEER
Contact Person: tiffany