Die Guide Bushing Universal Straight Type Components Guide Bushing.Standard Components for Press Die,Standard Components for Plastic Moulds,Standard Components for Sliding Material.Made to order from china.
Maintenance-Free, Self-Lubricating Bearings. “solid material with solid lubricants” for non-lubricated packing rings.
Plain Bearings & Self-lubricating Bushings | VIIPLUS Surface Engineering | Bearing Technology
Material: C 51900, Cu Sn8 P, CW453K, Fosforbrons VSB-22 FLANGE BUSHES Bronze Bearings made of CuSn8 with Lubrication Indents
Bronze Wrapped Bearing with Oil Pockets (090 CYLINDRICAL BUSHES) Wrapped Bronze Bearings (low-maintenance), used for heavy load applications, offered with lubrication pockets, grooves or thru holes, plain or flanged bearings and strip PERFORMANCE 090 CYLINDRICAL BUSHES FLANGE BUSHES
Bronze Bearing Factory,Bronze Bushing supplier,CuSn8 flange bronze bush
Bearing material made of solid bronze strip with indents for lubrication
Good wear resistance, suitable for rough conditions
Optimum performance under relatively high loads and low speeds
Easy for fitting and lubricating
High load capacity
Inner Diameter machineable parts are available against order
High level thermal conductivity
Minimum overall dimensions
Initial pre-lubrication at assembly required
Wrapped dry sliding bearings also have a multi-layered composition. A
porous bronze layer is sintered onto a steel or bronze strip. The function
of this layer is to connect the carrier and the sliding layer. It also ensures
that the necessary heat removal can occur.
The bearings are wrapped from a cold formed homogenous bronze (CuSn8) with exceptional material properties. The standard sizes are fitted with diamond shaped lubrication indents in the bearing surface. These indents serve as lubricant reservoirs to rapidly build up a lubrication film at the start of movement and thereafter reduce the running friction. The material is suitable for construction and agricultural machinery applications.
Coefficient of friction
Coef. of thermal expansion
STRUCTURE AND COMPOSITION
Sn 8 %
P < 0.05 %
Bronze Bearings and Bronze Sleeve Bushings made of CuSn8 with Lubrication Indents
This type of bushing is widely applied in hoisting machines and other construction machines, automobiles, tractors, trucks, machines tools and some mineral engines. It can be fabricated into bushes, half bearings, flanged bushes, taist washers, spherical bearing andsoon.