Customized High Quality Flange Bimetal Bushing

Bimetal plain bearing bushes consist of a bronze and steel alloy. The soft bronze inner layer can provide good lubricating performance with oil grease, the hard steel back can support the whole bearing well and reduce the cost.

These Bimetal plain bearing bushes are mainly used for bearing arrangements where heavy loads must be supported and where the rotational or oscillating movements are relatively slow.

Bimetal Bushing standard sizes have grease grooves on the work surface. For standard bearings, the steel base is usually copper plated to improve corrosion resistance. The lead bronze layer allows these bearings to be used with relatively long lubrication intervals.
Bimetallic bearings can be fabricated with a thicker layer of lead bronze for applications where the bearing must be machined after installation. The layer material can be tailored to the specific needs of a particular application.

Flanged Bimetal Bushing

· Maximum Operating Temperature Tmax-greased:150 °C

· Maximum Operating Temperature Tmax-oil lubricated:250 °C

· Minimum Operating Temperature Tmin:-40 °C

· Maximum Static Load Psta,max:300 N/mm2

· Maximum Dynamic Load Pdyn,max:140 N/mm2

· Maximum Sliding Speed V-greased:2.5 N/mm2 * m/s

Bimetal sintered Bearing Sleeve high strength self-lubricating bearings

Bimetal sintered bearing is made of common bimetal bearing and flange by sintering. Because its bimetal matrix is low carbon steel and lacks ductility, the sintering process is adopted to meet the demand of mechanical structure with flange structure.

This is a bimetal bearing material in which bronze alloy comprise a two layer structure with a steel backing. This structure, whose mechanical strength is high, can be used under lubricated conditions and high-speed/high-load operation. It can be made from a variety of different materials, depending on the application, use conditions and lubrication.

Sintered SAE797 Layer + Steel Backed + Copper Plating / Tin-Plating(CuPb10Sn10) 
Sintered SAE799 Layer + Steel Backed + Copper Plating / Tin-Plating(CuPb24Sn4)
Sintered SAE48 Layer + Steel Backed + Copper Plating / Tin-Plating    (CuPb30)
Sintered SAE783 Layer + Steel Backed+ Copper Plating / Tin-Plating   (AlSn20Cu)

Bimetal series materials, also known as bimetallic materials or steel backed strips, are made of low carbon steel or steel coil as the base material, and the surface is sintered with bronze alloy steel and bronze alloy products. Different bronze alloy materials are suitable for different working conditions. The surface copper alloy grades can be divided into high lead series, lead series and lead-free series.

Our self-lubricating bearing products have been supplied in chassis walking mechanism, body parts, hydraulic components and other parts.Including bimetal boundary lubricated rolling bearing our self-lubricated bearing products have been supplied in chassis walking mechanism, body parts, hydraulic components and other components.

The performance parameters of bimetal bearings are the national material standards

You can also choose other product structures

Select the type of groove for your bimetal bearing (part)

Select the type of bimetal clasp you want

Overview

The bimetal bushings product is based on high quality low carbon steel, with sintered lead-tin bronze alloy CuSn4Pb24 on the surface. The alloy surface can be processed into oil groove, which is convenient for oil storage and effectively reduces wear.The steel back can be plated with anticorrosive coating as required.This series of products are often used in internal combustion engine spindle and connecting rod bearings, thrust pads, rolling bearings and so on

Application field

Products are widely used in construction machinery used for supporting wheel shaft sleeve, supporting belt wheel shaft sleeve, tensioning wheel shaft sleeve, automotive balance shaft sleeve, steel plate sleeve, steering joint main shaft sleeve, connecting rod shaft sleeve, valve rocker arm shaft sleeve, camshaft shaft sleeve, differential shaft sleeve, thrust gasket, piston pump side piece, gear pump side piece.

Construction machinery: chassis walking mechanism supporting wheel shaft sleeve, towing wheel shaft sleeve, tension wheel shaft sleeve;Automobile industry: balance shaft bushing, steel plate pin bushing, steering knuckle-main shaft bushing, connecting rod bushing, valve rocker arm bushing, camshaft bushing, differential bushing, gearbox bushing, internal combustion engine spindle bushing, thrust gasket;And plunger pump side piece, gear pump side piece, etc