|Features:||Facilitate Oil Storage||Material:||Bimetal Steel Copper Alloy (CuSn4Pb24)|
|Standard:||DIN1494||Bush Types:||Trust Washer ,metal, Sliding Bearings|
|Shaped:||Oil Groove||Customized:||Available As Per Drawing Or Sample, As Drawing, Welcome Customized Drawings|
Viiplus is always focusing on the overseas markets, by satisfying the ever-increasing demands of modernization of customers. We could provide products according to the international standards, and could also provide as per the customers' requests. With stable product quality and best level of services, our products have been exported to dozens of countries and regions from the Europe, the United States, and Southeast Asia, etc.
Bimetal Washer is made of steel sintered with CuPb10Sn10 or CuSn6Zn6Pb3 as a lining layer.This type of bushing show its best performance among bushings made of Cu-lead alloy material in this product range.It suits most for middle speed and high impact conditions.Its application including balance suspensions of heavy-duty trucks, track roller of bulldozers,auto chassis etc.
|Lead bronze alloy||
CuPb10Sn10 or CuSn6Zn6Pb3
|Load capacity||65N/mm²||Harderness alloy||HB70~100|
Bimetallic Bronze Bushings.Get Your Custom Quote Today. BronzeGleitlager.Com Design Bimetallic Bronze Bushings & Connecting Rod Bushing.Online Catalog Available. Precision Bimetal Bushing With Steel Backing & Bimetal Plain Bearings Supplier
Bimetal Plain Bearings Made in China
Steel copper alloy CuSn4Pb24 Bimetal Bushes Material Trust Washers & METAL BUSHING (LUBRICATED METAL)
VIIPLUS Bimetal Bushing Made in china ,German DIN standard, European EN standard and international ISO standard, etc can be produced and provided.Plain Bearings - Wrapped Bushes For Plain Bearings - Test Data For Outside And Inside Diameter On Dra.
These high-performance metallic bearing materials solve a host of problems that plague sliding parts.
The bimetal bushings product is based on high quality low carbon steel, with sintered lead-tin bronze alloy CuSn4Pb24 on the surface. The alloy surface can be processed into oil groove, which is convenient for oil storage and effectively reduces wear.The steel back can be plated with anticorrosive coating as required.This series of products are often used in internal combustion engine spindle and connecting rod bearings, thrust pads, rolling bearings and so on
Bimetal Bushings German DIN standard, European EN standard and international ISO standard, etc can be produced and provided.
DIN1494 standard bimetal bushing supplied by VIIPLUS.Our main oil-free bearing related products sales and services.For DIN1494 bimetallic bushing inquiries welcome to contact or online message
Material: steel + copper alloy (CuSn4Pb24)
The product is based on high quality low carbon steel and sintered lead tin bronze alloy CuSn10Pb10.The diamond hole is rolled on the surface of the alloy and filled with special solid lubricant to effectively reduce wear.The steel back can be plated with anticorrosive coating as required.It is suitable for high temperature, water solution infiltration or other occasions where oil cannot be added or where oil is difficult.
The highest PV value is 2.8 N/mm2·m/s for grease lubrication
Matching shaft hardness 48 HRC
Oil lubrication 10 N/mm2·m/s roughness Ra=0.16~0.63
Maximum linear velocity V dry grease lubrication 2.5 m/s highest use temperature 150 ℃
Grease lubrication 10 m/s lubrication 250 ℃
Tensile strength 150 N/mm 2 friction coefficient 0.05~0.15
Hard alloy degrees
HB 45~70 thermal conductivity 60 W/ (m·k)
Coefficient of thermal expansion
19· 10-6k-1 maximum bearing pressure P 130 n/was
as per drawing or sample, as drawing, Welcome Customized Drawings
Bimetal bushing VIIPLUS provides products with high compressive strength, small friction coefficient, good wear resistance, reduce the cost of machinery manufacturing, its performance has reached the level of similar products at home and abroad.The products are widely used in construction machinery, textile machinery, automobile industry, machinery industry and other fields, especially for the parts that are difficult to oil and can not oil have a good effect, free from oil pollution.
The enterprise takes "pursue excellence, keep improving" as the management objective, and strives to provide customers with first-class products and services.
Contact Person: tiffany
Meterial: Bimetal ,Bronze/Steel Bushing,is available with stainless steel, carbon steel or bronze backing.
Characteristic: thin walled bearing,Low-maintenance And Maintenance-free Plain Bearings
Size: IMPERIAL & METRIC SIZES,Standard Size Available
Type: Cylindrical bushes Thrust washers, Strips Or Special Designs