David from CanadaOur company import the bronze gleitlager from viiplus china,viiplus professional team makes sure customs clearance is always smooth. They provide an accurate bronze bushing classification, handle all the paperwork,We have received the self-lubricating bronze bushings. They look well done and the high quality.
Valerie from CaliforniaWe import the bronze gleitlager from China to under the incoterm FOB shanghai, sometimes by Air. viiplus is a very good bronze gleitlager supplier, they are very professional and patient, after we inform the new order, they will manufacturer bronze gleitlager in time and give us the schedule , and then we just need to receive the bronze parts
Daisy From GermanyThe best surface finishes for Sleeve Bearing, tighter concentricity, and bronze bushings material uniformity. The good supplier of standard inch and metric sleeve bearings and bushings from china.
SAE 1010 Bimetallic Slotted Self Lubricated Bearings
|Place of Origin||gleitlagerbuchsen china|
|Brand Name||viiplus bimetal bushing|
|Model Number||SAE 1010 bimetal bushing|
|Minimum Order Quantity||According to the size of the product|
|Price||According to the size of the product|
|Packaging Details||Cartons are packed in wooden case|
|Delivery Time||5-25 works day|
|Payment Terms||L/C, T/T|
|Supply Ability||bronze sleeve bushings, China, manufacturers, suppliers, factory, wholesale, Metallic Self Lubricating Bushings, Cast Iron Bearing, Sleeve Bushing, POM Bearing, Cast Iron Plain Bearing, Lubrication Bronze Bushing|
|Material||SAE 1010+copper||Price||Can Discuss|
|Size||Customer||Transportation||Air Sea Train|
sintered bronze bushing,
sae 1010 sintered bushing
VIIPLUS offers basically the same bearing characteristics:
but is capable of even higher loadsand offers an economic solution to many bearing problemsBimetal bushings application for Water turbines, injection moulding machinery, packing machinery, printing machines, construction equipment, shut-off valves, tire moulds and many more.
1. Low-friction surface film
2. Bearing layer (bronze)
3. Solid lubricant (graphite)
4. Steel backing
Bimetallic bearing is briefly introduced
Bimetal sliding bearings are made from bronze and steel alloy. The soft bronze inner layer can provide good lubricating performance with oil grease, hard steel back can provide good support on the whole bearing and cut down the cost.
These bearings are primarily used for bearing arrangements where heavy loads have to be supported and where rotational or oscillating movements are relatively slow.
This is a bimetal bearing material in which bronze alloy comprise a two layer structure with a steel backing. This structure, whose mechanical strength is high, can be used under lubricated conditions and high-speed/high-load operation. It can be made from a variety of different materials, depending on the application, use conditions and lubrication.
Sintered SAE797 Layer + Steel Backed + Copper Plating / Tin-Plating(CuPb10Sn10)
Sintered SAE799 Layer + Steel Backed + Copper Plating / Tin-Plating(CuPb24Sn4)
Sintered SAE48 Layer + Steel Backed + Copper Plating / Tin-Plating (CuPb30)
Sintered SAE783 Layer + Steel Backed+ Copper Plating / Tin-Plating (AlSn20Cu)
Bimetallic Self Lubricated Bearings With Lubrication Pockets
|Wrapped composite sliding bearing, Copper-plated or tin-plated steel/bronze, DIN 1494 / ISO 3547, Maintenance-free, With lubrication pockets|
|Specific load capacity static||≤ 250 [N/mm2]||Temperature strain||- 40 [°C] to + 250 [°C]|
|Specific load capacity dynamic||≤ 140 [N/mm2]|
|Sliding speed||≤ 2.5 [m/s]||Max. PV-value||2.8 [N/mm² x m/s]|
|Friction value||0.04 [µ] to 0.12 [µ]||Percentage contact area||> 75 [%]|
|Support material||Steel copper-plated or tin-plated||Sliding layer||CuPb10Sn10|
|Housing Ø||H7||Shaft tolerance||f7 to h8|
|Bushing inner-Ø after mounting||H9|
|Steel, hardened or untempered|
|Surface roughness ≤ Ra 0.8|
|For high load capacity and oscillating movement, as well as for rough operation and temperature load. Long-run lubrication because of lubricant storage.|
|RANGE OF APPLICATION|
|Track rollers, construction machines, crane construction, agricultural machines (impact loading)|
|It is a low-maintenance bushing material. An initial greasing during installation is necessary, after that periodic greasing with oil or grease is mandatory.|
|Housing||Mounting bevel min. 1.5 mm x 15-45°|
|Shaft||Mounting bevel 5 mm x 15°, edges rounded|
|The application of an adequate force fitting mandrel is advisable. Grease lubrication of the outer surface may be necessary when mounting.|
|Gluing||Adhesive should not contact the sliding surface!|
Types of Oil Grooves for bimetal bushings
Types of Butt Jionts for bimetal bushings (Slit & Clinch)
Bimetal Bearings Bushings Buckle Form
Bushing Company, Sintered SAE-799 CuPb24Sn4 bimetal bushing Supplier.Working together to create solutions for the most demanding BIMETAL applications.Need Help Finding the Right Bimetal Bushing Products?Our Plain Bearings Parts Experts Can Help. Call for immediate assistance.Ask for a qoute for material Steel+CuPb10Sn10,Steel+CuPb24Sn4,Steel+CuPb24Sn,Steel+CuPb30,Steel+CuPb10Sn10+GRAPHITE.
This Bi-metal Bushing can be manufactured in various type or customized.
-Thrust or Bearing Plates
-Welded Joint Bushing
-Split Joint Bushing
-Clench Lock Bushing
-Specialized machined features