CUSN8/CUSN6 090 Series thrust washer biggest feature is the thin-walled structure, does not occupy a large installation space.thrust washer material specially formulated high-density copper alloy strip. Compared with the traditional casting of copper, with high density, no gas shrinkage, carrying capacity, but also wear resistance, fatigue and other advantages. thrust washer manufactured using advanced tooling, can be processed into a variety of engineering conditions apply oil hole, oil pit, sump friction surface strip, so that the sleeve can store a lot of grease in use, to extend the refueling interval, effective increased service life.
CW453K | CuSn8P | Phosphor Bronze Sleeve Bushings with oil holes Made in China is manufactured using Copper Alloy proprietary process technology to achieve a very high tensile strength and coupled with good fatigue properties enable it to be used in high load, high impact Bushing bearing applications where good wear characteristics are essential. CuSn8 wrapped bronze bush & washer, diamond oil pockets, ISO3547standardThe alloy can also hold its own in aggressive corrosion environments.The bronze bushing material alloy also meets NFL 14-703 CuSn8, DIN 17662/17672 W Nr 2.1030 and JIS H 3270.
Areas of use Heavy load bushings and sliding bearings, sliding plates,plain bearings
The 090 & 092 made in china sliding bearings are rolled from a bronze Cusn8 or Cusn6.5 Material strip with a high specific density. There are diamond-shaped or round lubricant grooves on the inner surface, incorporated as per the client's requirements.
BRONZE ROLLING Washer By CuSn8 or CuSn6.5 Bronze Strips With Spherical Or Diamond Shaped Indentations
Or Oil Grooves Holes Required By Customers.
This type of bearings is characterised by their high levels of resilience and long service lives. They take the place of the traditional bronze bushings, but are more economical and more compact.
It Is Typically Used in lifting vehicles and construction machinery, cars, tractors, trucks, machine tools and in the engine construction industry Etc.
Rolled Bronze Washer| CuSn8 or CuSn6.5
They also serve as safety areas that capture debris that may find its way into the bushings and shaft during operation.
Perforated bronze products are available as sleeves, flanges and plates and are produced in inch and metric sizes. Typical applications include material handling, hydraulic cylinders, lifting equipment and agricultural machinery.
Cylindrical bushing,flanged bearing ,wahser ,sliding plate and strip are available.Bronze bushing is a kind of wrapped self lubricating bearing. This type bearing including 090 bronze bearing, 092 bronze bearing with oil hole. We are leading Manufacturers of Bimetal Bearing, Bronze Bearing, Sliding Bearing,Sleeve Bush Bearing, Linear Bearing.
The main advantages of wrapped bronze bearings include:
Long service intervals
Not affected by impurities
Suitable for corrosive environments
Suitable for impact loads and vibrations at low speeds
Good heat dissipation
High load capacity and stability at low abrasion. Because of perforations lubrication clearances are reduced to a minimum!
Wrapped bronze sliding bearing
CuSn8 or Cusn6.5
Available on request
Rolled Bronze with Oil Perforations
• Metric Sleeves
• Metric Flanges
Bronze Wrapped Bearing with holoes (092 CYLINDRICAL BUSHES )
Bronze Bushes and Oil Pockets 090 & 092 BRONZE BUSHES
CuSn8 and CuSn6.5 Wrapped Bronze Bearing Diamond Or Ball Shape Oil Sockets
CuSn8P0.3 / CuSn6.5P0.1
75 N/mm2 × m/s
VSB-22 CuSn8P Wrapped Bearings
Wrapped Bronze Bearings (low-maintenance), used for heavy load applications, offered with lubrication pockets, grooves or thru holes, plain or flanged bearings and strip
Bearing material made of solid bronze strip with indents for lubrication
Good wear resistance, suitable for rough conditions
Optimum performance under relatively high loads and low speeds
Easy for fitting and lubricating
High load capacity
Inner Diameter machineable parts are available against order