Diamond-shaped lubricant reservoirs.Wrapped bronze bushings are particularly well suited for applications where high levels of contamination make relubricationnecessary. The sliding surface of an cusn8 wrapped bronze bushing contains diamond shaped pockets that must initially be filled with grease. The pockets act as reservoirs to progressively release lubricant during operation. Bushings offers a full range of both straight and flanged wrapped bronze bushings.Straight bushings are manufactured to dimensions in accordance with ISO 3547.
Wrapped bronze bushings Feature
• insensitive to contaminated environments
• resistant to shock loads and vibrations
at slow speeds
• good resistance to corrosive environments
Diamond Bronze Bearings Tuleja z brązuMade Of Cusn8 With Lubrication Indents Stock Standard Dimensions Tolerance Bearing forms made to order: cylindrical bushes with non-standard dimensions, flanged bushes, sliding plates, customized bearing designs
BRONZE BUSHINGS APPLICATION– Mechanical handling and lifting equipment,hydraulic cylinders, pneumatic equipment, medicalequipment, textile machinery, agricultural equipment, etc.
BRONZE BUSHINGS CHARACTERISTICS — Bearing material made of solid bronze strip with indents for lubrication — Good wear resistance, suitable for rough conditions — Optimum performance under relatively high loads and low speeds We are a manufacturer of Sleeve Bushing ,Flanged Bearing and Plate. our own certified structural solutions constituting belt conveyors as well as elements of mechanized wall casings. We supplier the bushing for replacment of conveyor components and route bushing bearings components.Slide Bearings Customized Bushings Manufacturing Bearing Shapes & Forms Made To Order: Plain Cylindrical Bearings, Flanged Bearings,Thrustwashers, Slidingplates.Materials Wrapped bronze bearings are made entirely from phosphor bronze CuSn8 Diamond Oil Hole.Wrapped Bronze Bushings CuSn8 Stock Size Diamond oil hole Bronze wrapped bearing with holes
To the H9 tolerance of the slide bearing we recommend shafts with tolerance e7 or f7. If h-shafts are used, the bearing inner diameter should be machined up to tolerance F7.
The bearings are intended to be pressed into a housing with H7 tolerance.
The inner diameter of the slide bearing will then hold tolerance H9.
STRUCTURE AND COMPOSITION
The bearings are wrapped from a cold formed homogenous bronze (CuSn8) with exceptional material properties. The standard sizes are fitted with diamond shaped lubrication indents in the bearing surface. These indents serve as lubricant reservoirs to rapidly build up a lubrication film at the start of movement and thereafter reduce the running friction. The material is suitable for construction and agricultural machinery applications.
Bronze Bearings and Bronze Sleeve Bushings made of CuSn8 with Lubrication Indents
Sn 8 %
P < 0.05 %
Process fluid lubricated
Maximum load, p
Maximum sliding speed,
Coefficient of friction
0.08 - 0.25
AVAILABILITY Bearing forms available in standard dimensions
TYPICAL APPLICATIONS This type of bushing is widely applied in hoisting machines and other construction machines, automobiles, tractors, trucks, machines tools and some mineral engines. It can be fabricated into bushes, half bearings, flanged bushes, taist washers, spherical bearing andsoon.SIZE 090 092 Bronze wrapped bushing