Plain Flange Sleeves Bearings GLEITLAGER BUSHINGS CYLINDRICAL BUSHES made of CuSn8 with Lubrication 092 bush | VSB-22
Description 092 bronze bushings is deriving from 090; the difference between 090 & 092 bronze bushings is Indentations on working surface, which substituted by Through-holes. Theses holes will allow greater capacity to collect lubricant, which build up a lubrication film at the start of movement and reduce the frication. It is suitable for high load, lower speed application like construction, Transport, and agriculture machinery.
Rolled flange bearings with lubricating holes.
Bronze Wrapped Bearing with Oil Pockets(092 CYLINDRICAL BUSHES)
VSB-22 092 CYLINDRICAL BUSHES
· Bearing material made of solid bronze strip with indents for lubrication
· Good wear resistance, suitable for rough conditions
· Optimum performance under relatively high loads and low speeds
092 Chemical Composition
· 1.Easy for fitting and lubricating
· 2.High load capacity
· 3.Inner Diameter machineable parts are available against order
· 4.High level thermal conductivity
· 5.Minimum overall dimensions
· 6.Chemical resistance.
· Initial pre-lubrication at assembly required...
The bearings are wrapped from a cold formed homogenous bronze (CuSn8) with exceptional material properties. The standard sizes are fitted with diamond shaped lubrication indents in the bearing surface. These indents serve as lubricant reservoirs to rapidly build up a lubrication film at the start of movement and thereafter reduce the running friction. The material is suitable for construction and agricultural machinery applications.
STRUCTURE AND COMPOSITION
Bronze Bearings and Bronze Sleeve Bushings made of CuSn8 with Lubrication Indents
Sn 8 %
P < 0.05 %
Process fluid lubricated
Maximum load, p
Maximum sliding speed,
Coefficient of friction
0.08 - 0.25
Coefficient of friction
Coef. of thermal expansion
Bearing forms available in standard dimensions
· Cylindrical bushes Bearing forms made to order: cylindrical bushes with non-standard dimensions, flanged bushes, sliding plates, customized bearing designs
This type of bushing is widely applied in hoisting machines and other construction machines, automobiles, tractors, trucks, machines tools and some mineral engines. It can be fabricated into bushes, half bearings, flanged bushes, taist washers, spherical bearing andsoon.