Made to order from china wrapped bushing diamond pockets, Bronze CuSn8, DIN 1494 / ISO 3547, Low-maintenance
The diamond pockets are an excellent lubrication depot and keeping maintenance to a minimum.Bronze Sleeve Bushings 090 Series’ indentations on the sliding surface are replaced by through-holes.Wrapped bushing is a low maintenance bushing material,Economic solution for bronze bearing application due to a thin wall thickness. An initial greasing during installation is necessary, after that periodic greasing with oil or grease is mandatory.This allows the 090 Series to have a greater capacity to collect the lubricant compared with the indentations.Plain Bearings and Sleeve Bearings
Metric Bronze CYLINDRICAL FLANGE BUSHES CuSn8 with Lubrication 090
Conomic solution for bronze bearing application due to a thin wall thickness. High load capability and good stability with low abrasion. Suitable for rough working conditions, good corrosion resistance.
Support material:CuSn8P (DIN 17662) alternative CuSn6P available
Bushings Features 1.Easy for fitting and lubricating 2.High load capacity 3.Inner Diameter machineable parts are available against order 4.High level thermal conductivity 5.Minimum overall dimensions 6.Chemical resistance. Initial pre-lubrication at assembly required...
FLANGE BUSHES Bronze Bearings made of CuSn8 with Lubrication Indents Bronze Wrapped Bearing with Oil Pockets(090 CYLINDRICAL BUSHES)Wrapped Bronze Bearings (low-maintenance), used for heavy load applications, offered with lubrication pockets, grooves or thru holes, plain or flanged bearings and strip.The bearings are wrapped from a cold formed homogenous bronze (CuSn8) with exceptional material properties. The standard sizes are fitted with diamond shaped lubrication indents in the bearing surface. These indents serve as lubricant reservoirs to rapidly build up a lubrication film at the start of movement and thereafter reduce the running friction. The material is suitable for construction and agricultural machinery applications.
Bronze Bearings and Bronze Sleeve Bushings made of CuSn8 with Lubrication Indents
Process fluid lubricated
CuSn8 with composition Sn 8 % P < 0.05 % Cu Rest
Coefficient of friction
Coef. of thermal expansion
AVAILABILITY:Bearing forms available in standard dimensions · Cylindrical bushes Bearing forms made to order: cylindrical bushes with non-standard dimensions, flanged bushes, sliding plates, customized bearing designs
RANGE OF APPLICATION
Agriculture machinery, truck cranes & construction machinery, suitable for impact loads.