Tin Bronze CuSn8P, DIN 1494 / ISO 3547, Low-maintenance Bronze Wrapped cylindric split Bearing with Through Holes.The bushings are wrapped from a cold formed homogeneous bronze (CuSn8) with exceptional material properties. The standard sizes incorporateholes, which are dispersed in a special way over the whole bushing surface.These holes serve as lubricant reservoirs to rapidly build up a lubrication film at the start of movement and thereafter reduce the running friction. The material is suitable for construction and agricultural machinery etc.where high load and slow movement occur.
Structure The bearings are wrapped from a cold formed homogenous bronze (CuSn8 & CuSn6) with exceptional material properties. The standard sizes incorporate holes, which are dispersed in a special way over the whole bearing surface. These holes serve as lubricant reservoirs to rapidly build up a lubrication film at the start of movement and thereafter reduce the running friction. The material is suitable for construction and agricultural machinery etc. where high load and slow movement occur.
Features 1.Easy of fitting and lubricate 2.High load capacity 3.Excellent wear resistance with lower friction 4.High level thermal conductivity 5.Minimum overall dimensions 6.Chemical resistance 7.Extended service life and lubrication intervals than normal CSB-090 type bearings 8.Free selection of lubricants 9.Collection of dust and rub off particles in the holes Initial pre-lubrication at assembly is required...
Wrapped bronze sliding bearing
High load capacity and stability at low abrasion. Because of perforations lubrication clearances are reduced to a minimum!
Coefficient of friction
Coef. of thermal expansion
BUSHINGS TOLERANCE DETAILS
Bushing inner-Ø after mountingH9
Shaft tolerancef7 to h8
is a low-maintenance bronze sliding bearing, primary lubrication is necessary. Oil or grease lubrication is possible. Due to lubrication pockets lubrication clearances are reduced to a minimum
RANGE OF APPLICATION
This type of wrapped bushing, Bronze CuSn8P, DIN 1494 / ISO 3547, Low-maintenance sliding bearings is widely applied in hoisting machines and other construction machines,automobiles, tractors, trucks, machines tools and some mineral engines. It can be fabricatedinto bushes, half bushings, flanged bushes, trust washers, spherical bushing and so on.
CAPTION:Special dimensions are available on request