Diamond oil hole FB090 Bronze Material CuSn8 Or CuSn6.5 Metric TIN BRONZE Bushings Sheet Strip
FB090 bronze material is made of special high-density copper alloy strip as the base. The surface can be rolled with diamond or hemispherical oil holes and oil grooves. It has the advantages of high density, large bearing capacity, good wear resistance and long service life. Materials have been widely used in lifting machinery, construction machinery, automobile tractor chassis, machine tool industry and mining machinery, and can also be used in the form of bearing bushes, flanged bushings, thrust washers and ball bowls.
Material: CuSn8P0.3 or CuSn6.5P0. 1
Applicable temperature range: -80 ° C ~ 200 ° C
Maximum load pressure: 75N/mm2
Maximum sliding speed: 2.5m/s
The bearings are wrapped of a cold formable homogenous bronze (CuSn8),
which will obtain exceptional material properties. The standard size are fitted
with diamond shaped lubrication indents on the surface of bearing. These
indents serve as lubricant reservoirs to rapidly build up a lubrication film in the
start movement and therewith reduce the start friction.
VSB-22 Bronze CuSn8 with Lubrication 090 Strips, Slide paths
Bronze (090 Strips Material )
Wrapped Bronze Bearings (low-maintenance), used for heavy load applications, offered with lubrication pockets, grooves or thru holes, plain or flanged bearings and strip
· Bearing material made of solid bronze strip with indents for lubrication
· Good wear resistance, suitable for rough conditions
· Optimum performance under relatively high loads and low speeds
· 1.Easy for fitting and lubricating
· 2.High load capacity
· 3.Inner Diameter machineable parts are available against order
· 4.High level thermal conductivity
· 5.Minimum overall dimensions
· 6.Chemical resistance.
· Initial pre-lubrication at assembly required...
The bearings are wrapped from a cold formed homogenous bronze (CuSn8) with exceptional material properties. The standard sizes are fitted with diamond shaped lubrication indents in the bearing surface. These indents serve as lubricant reservoirs to rapidly build up a lubrication film at the start of movement and thereafter reduce the running friction. The material is suitable for construction and agricultural machinery applications.
STRUCTURE AND COMPOSITION
Bronze Bearings and Bronze Sleeve Bushings made of CuSn8 with Lubrication Indents
Sn 8 %
P < 0.05 %
Process fluid lubricated
SIZE 090 Bronze wrapped bushing
Coefficient of friction
Coef. of thermal expansion
Bearing forms available in standard dimensions
· Cylindrical bushes Bearing forms made to order: cylindrical bushes with non-standard dimensions, flanged bushes, sliding plates, customized bearing designs
1. The products inside surface is full of diamond oil indention, which can stock grease.
2. Minim oil lubrication, which be applied in water-lubrication environment
3. Good anti-abrasion, low coefficient of friction, long operating life.
4. Can work consecutively at 100 ~+200 .
5. Good mending, low-noise, non-pollution
6. Thin wall, light, can reduce the volume of the machine
7. High density, high load no alveoli
The products now are applied in sliding parts of different machine, such as auto machines, pumps, plastic injection
machine, auto industry, heavy equipments, etc.