When referring to  flanged bushings in inch sizes, it typically means that the dimensions and specifications of the bushings are based on the inch measurement system.  bushings, also known as oil-impregnated sintered bronze bushings, are self-lubricating bushings commonly used in various applications where lubrication may be difficult or impractical.

The flanged design of these bushings allows for easier installation and retention within housings or other components. The inch size specification indicates that the dimensions such as the outer diameter (OD), inner diameter (ID), length, and flange dimensions are provided in inches.

Some key points to consider when specifying  flanged bushings in inch sizes:

Dimensional Accuracy: Ensure that the inch dimensions provided are accurate and match the requirements of your application.
Material Selection:  bushings are made from oil-impregnated sintered bronze, which provides good wear resistance and self-lubricating properties. However, consider other factors like operating temperatures and chemical compatibility when selecting the material.
Flange Design: The flanged design provides additional retention and support. Make sure the flange dimensions are suitable for your application and housing design.
Installation Considerations: Proper installation is crucial for the performance and longevity of  bushings. Ensure that the bushings are pressed or installed into their housings without excessive force, which can damage the material.
Lubrication: Although  bushings are self-lubricating, some applications may require additional lubrication. Check the manufacturer's recommendations for lubrication requirements.
Remember to consult with your supplier or manufacturer for specific details and recommendations on  flanged bushings in inch sizes to ensure that you select the appropriate product for your application.

Self-lubricating steel-backed  flanged bushing - inch Size tin plating or copper plating

Custom Solutions for Demanding Technical Requirements

We work closely with our customers to develop new self-lubricating bronze bushings solutions that are then added to our list of catalog bronze bushing products.

Large Inventory of Bronze Bushings, Bronze Bearing and Self-lubricating Wear Plates. Gleitlager. Bushing Sleeve bearing. Bushes Catalogs and Brochures Available.

Self-Lubricating Bronze Bushing, Steel Backed  Plain Bearing

Metal-Polymer Bearings Bearings Replacement sleeve

Discovery  bushing bearing, relating to plain bearings and self-lubricating bushings material and bushing price ...

Plain-Bearing - Bore size, OD size,  Length size, Material

80160/ Plain Bearing - ID=242, OD=247, Length=100mm
80161/ Plain Bearing - ID=300, OD=305, Length=100mm

VIIPLUS SLIDING BEARING Our range offered SME includes Metal Bushing, Steel Sleeve BushingThrust Washer, Bronze Graphite Plate, Valve Gearbox Bushings, and more. Besides these, we are also rendering Metal Coating Self-lubricating bearing Strips, Material Export Service and more.

Plain bearing materials Plain bearing Strips, Slide paths PAS Strips Material in detail Strip Metric Streifen, Gleitbahnen | VSB-10

Impregnated with our own proprietary lubricant, these bushings are composed of and special material uniformly dispersed within polyacetal plastic resin, a plastic material offering excellent bearing characteristics.

 
VSB-10 Strips, Slide paths PAS 

Strips are available in two material groups:

VSB-10 Steel + Bronze Powder + /Fibre Bushings

 
1. /Fibre mixture thickness 0.01~0.03mm. It is the contact surface for the rotating shaft. Minute partides of the layer and the sintered bronze material combine to create a solid lubricant film, which coats the shaft.
 
2. Sintered bronze powder thickness 0.20*0.35mm,A special composition of powdered copper is thermally fused to the steel backing. This contact layer acts as an anchor for the layer and conducts the thermal build up away from the bearing surfaces.

3. Low-carbon steel backing. Setting the foundation of the bushings, the steel back provides exceptional stability, load carrying and heat dissipation characteristics.

· Metal-Polymer Composite Self-lubricating Bushing Material
· Steel Back + Porous Bronze Sinter +
· + Lead

* Depending on operating conditions

Bearing forms available in standard dimensions

• Cylindrical bushes
• Flanged bushes
• Thrust washers
• Flanged washers
• Sliding plates

Metric bearings and imperial bushings made to order: standard bushing forms in special dimensions, half-bushings, special shapes obtained by stamping or deep drawing, customized bushing designs 
 

This material meets the demanding criteria for long life and maintenance free performance with or without lubrication.
Automotive: tractors, combines, crop sprayers, earth-movers, graders and other construction, auto machines, specific uses in power steering cylinders, steering gear thrust washers, disc brakes, calipers and pistons, shock absorbers, governor linkage, windshield wiper motor, tilt gear assemblies...
Business machines: photocopy machines, typewriters, mail sorters, postage meter systems, computer terminal printers and peripheral equipment, automatic printing devices, mail processing machinery...
Hydraulics and valves: pumps including gear, rotary, water, axial piston, and other types, ball, butterfly, poppet steam, and other valves and valve trunnions...
Home appliances: tape recorders, refrigerators, air conditioners, cleaners, polishers, sewing machines, ovens, dishwashers, clothes washing machines...And materials handling, marine engine, packaging, textile equipment, tools...etc.