The DTX-D1 Washer Thrust POM Bushing, available with either tin or copper plating, is a precision-manufactured component designed to withstand high thrust loads and provide smooth operation in various industrial applications.

Constructed from POM (Polyoxymethylene), this bushing offers excellent mechanical properties, including high stiffness, low friction, and good wear resistance. The POM material also exhibits good chemical stability, making it suitable for use in a wide range of environments.

The thrust washer design of the bushing allows it to distribute loads evenly, minimizing stress concentrations and extending the component's lifespan. The tin or copper plating adds an extra layer of protection, enhancing corrosion resistance and further improving durability.

The DTX-D1 bushing is highly customizable, allowing for variations in size, shape, and plating material to meet specific application requirements. This flexibility ensures that the bushing can be seamlessly integrated into various mechanical systems, providing optimal performance and reliability.

In summary, the DTX-D1 Washer Thrust POM Bushing with Tin or Copper Plating is a robust and reliable component that offers exceptional performance and durability in industrial applications. Its precision manufacturing and customizable design make it a trusted choice for handling high thrust loads and ensuring smooth operation.

DTX-D1 Washer POM Thrust Bearing, Pom Bushing

Thrust Washers, Metal-Polymer Composite Steel Backing, Bronze Innerstructure, POM Liner

MATERIAL :- POM ( ID YELLOW PERFORATED)

pom bushing

SF-1W Lead Free Thrust Bearings Oil Free Environmental protection Round punched

Manufacturer & Supplier of Thrust Washers. Our product range also comprises of Self Lubricating Sliding Bearings and Enameled Strips.

DTX-D1 washer Gasket washer bearings and washers are suitable for rotary and oscillating movements, have low maintenance requirements due to low wear, low sensitivity to edge loads, do not absorb water and therefore do not swell, have good damping behavior, and most importantly have good resistance to shock loads. It has a longer service life at low speeds and high loads.

This new material uses fiber fabric over steel backing, which has a high load capacity and a longer service life compared to conventional 3-layer bushings. This material is used for suspension and assistance in equipment for agriculture, construction machinery, cranes, hydraulic and mechanical arms, ball and butterfly valves and sluice valves, pumps and the chemical industry.
 

View our range of Low Friction Bushing-style -lined POM-bearing bushes. We are able to offer split-bearing bushes both standard and flanged. PTFE type split bearings and POM type split bearings & washer are also available. If there is anything you are unable to find the size. Please contact us.

POM Thrust Washers - Inch sizes View our POM washers here in metric sizes. Buy now for great prices and fast delivery.

Plain bearings or bushings or sleeve bearings, which are often referred to as individual plain bearings, are inserted into housings to provide bearing surfaces that support rotary or linear motion, usually in high load but relatively low speed applications, especially where no additional grease or oil is available. These bearings are made from "machined" plates or specially formulated castings and are available in different shapes in cylindrical (for linear and rotary motion), flanged (for thrust loads and rotary motion), thrust washers and ribbon (mainly for sliding applications) forms, in addition to different forms depending on the requirements of the application and surrounding components. Designers can use a wide range of column bearings in both metric and inch forms in the design phase. The sliding bearing bearing series refers to the company's production of 100% self-lubricating plain bearings, some of which are pre-lubricated, something that has not been specifically mentioned until now. These bearings are suitable for applications where the coefficient of friction is very low and the excellent sliding characteristics ensure a very low wear rating. The initial movement ensures that a certain level of lubricant is transferred to the shaft, thus avoiding metal-to-metal contact as well as protection. The bearing series is suitable for oscillation, rotation, high chemical resistance, low water absorption and expansion. It is worth noting that with some additional lubrication the plain bearings perform better. Bearings whose internal construction is made of strips or coils have a point along the length of the bushing, while those made of cast, extruded or forged materials do not. The final form of a split bearing generally depends on the housing (bushing outside diameter), as these are press-fitted, relatively speaking, and the variation in the final bore (bushing inside diameter) is in most cases predetermined, as described in the catalog.

Technical Data

POM Style bearing washers are a range of wrapped acetal lined bearings which are suitable for rotary and oscillating movement applications. Available in both metric and imperial sizes.

POM Type Washers - Metric
POM Type Washers - Imperial
 

POM composite thrust washers are suitable where oscillating and rotational movement can occur. These washers are punched from the composite material and have as standard a hole to take a pin or screw to prevent the washers from rotating on their seat. SF-2 Thrust washers Bronze+steel+pom Washers. POM Marginally Lubricated Bearings is for grease or oil lubricated applications. Visit https://www.bronzegleitlager.com/

SF-2 Thrust washers, SF-1 Thrust washer, PTFE Oilless Washer, Bronze steel pom washer, POM Maginal Washer.

POM Coated Self Lubricating Thrust Washer

SF-2 POM composite thrust washers Description

 
POM composite thrust washers have pockets in the sliding surface, which serve as grease reservoirs and should be filled with grease prior to installation. This makes these washers suitable for applications that require minimal maintenance under difficult operating conditions, for example in contaminated environments where lubricant cannot be supplied continuously or frequently. Despite of their compact design, POM composite washers can accommodate heavy axial loads and are less sensitive to misalignment. They are suitable for slow rotational or oscillating movements.
 
POM composite thrust washers consists of a sheet steel backing on which a 0,2 to 0,4 mm thick layer of tin/bronze is sintered. The principal characteristic of these washers is their relatively thick (0,3 mm) covering layer of acetal resin (POM – polyoxymethylene) with additives. This covering layer has pockets to retain grease and is firmly attached to the sintered tin/bronze layer.
 
The thickness of the covering layer makes these washers less sensitive to misalignment and the edge loading associated with that misalignment.
 
 

SF-2 Thrust washers Material:

POM (Metal Polymer Composite POM)
 

SF-2 Thrust washers Structure:

Metal-Polymer Composite Thrust Washer Material
 

SF-2 Thrust washers Composition:

Steel Back + Porous Bronze Sinter + Pom With Lubrication Indents
 

SF-2 Thrust washers Microsection:

• POM sliding layer with lubricant indents
• Porous Bronze Sinter
• Steel Backing
• Tin/Copper coating

SF-2 POM Thrust Washer Technical Details

SF-2 Thrust Washers Characteristics:

1.SF-2 POM coated self-lubricating thrust washer for grease or oil lubricated applications.

2.Standard parts contain grease indents in the sliding layer, plain sliding layer available by request.

3.Optimum performance under relatively high loads and low speeds.

4.Suitable for linear, oscillating and rotating movements.

5.Wide range of parts available from stock.

SF-2 Thrust Washers Typical Applications:

 
SF-2 POM based thrust washers is widely used in Vehicle chassis, forming machine tools, steel metallurgical machinery, mineral mountain machinery, hydraulic industry and rolling steel industry etc.
 
 

FOLLOW US ON

HTTP://WWW.BRONZEGLEITLAGER.COM