Manufacturers Hydraulic Bushing | Supply High - Pressure Pump Gear Pump Vane Pump Special Self-Lubricating Bearings
Hydraulic bushing suppliers and hydraulic bushing
Special oil-free self-lubricating bearing for vane pump
Vane pump, is the rotor tank vane and pump shell (stator ring) contact, will be inhaled liquid from the oil side pressure to the oil side of the pump
Plunger pump self lubricating bearing
Plunger pump is an important device of hydraulic system.It relies on the reciprocating movement of the plunger in the cylinder block, so that the volume of the sealed working chamber changes to achieve oil absorption and oil pressure.The plunger pump has the advantages of high rated pressure, compact structure, high efficiency and convenient flow regulation.Plunger pump is widely used in high pressure, large flow and flow needs to be adjusted occasions, such as hydraulic machines, construction machinery and ships.
Cylinder sleeve bushings
A cylindrical metal part that guides the piston to and fro in a straight line within a cylinder.Air in the engine cylinder through the expansion of heat into mechanical energy;The gas is compressed by the piston in the compressor cylinder to increase pressure.
Hydraulic cylinder Self lubricating bearings & bushings
Level move is realized by the co-operation of oil vat, handspike and synchronizer.
Hydraulic cylinder is the hydraulic energy into mechanical energy, do linear reciprocating movement (or swing movement) of the hydraulic actuator.
High pressure fatigue and impact resistant oilless bearing
High pressure pump is to provide high-pressure rotary spraying slurry with high voltage power equipment, used in construction, highway roadbed reinforcement reinforcement, can also be used for high pressure water jet assisted rock coal, downhole hydraulic prop for the liquid, the anchoring with hydraulic expansion metal anchor rod pump high pressure water, underground large pipe dredge desilting cleaning, etc.
Gear pump special Self lubrication bearing series
Gear pump is dependent on the pump cylinder and meshing gear formed by the change in working volume and movement to transport liquid or pressurized rotary pump.
Design Assistance | Material Selection | Component Geometry
Bearings and Componments
www.viiplus.com firstname.lastname@example.org www.bronzegleitlager.com
Contact Person: Miss. Tiffany
Tel: +86 18258386757