Hydro - Cylinder Plain Sleeve Bearing , Bronze Graphite Bushings For Rotating Movement

Hydro-cylinder bushes Plain Bearings and Sleeve Bearings Metal-Polymer Boccole DP4 CYLINDRICAL RED PTFE |VSB-40

Ptfe Bushes Manufacturers, Suppliers & We are a well-established firm that has made its presence in the industry, by supplying PTFEBush . PTFE is a self-lubricating material, provides low friction coefficient. It is ideally suited for the Hydraulic Cylinder

Metal-Polymer Low Friction Plain Bearings

Steel + Bronze Powder + PTFE/Fibre(DP4)

Self Lubricating Bearings Low-Carbon Steel + Porous Bronze + Red PTFE

VSB-40 low friction bushings offer good wear and low friction performance over a wide range of loads, speeds and temperatures in dry running conditions
· Very good performance in lubricated applications
· Good performance in greased applications
· Suitable for linear, oscillating and rotating movements
 
Suitable for dry running, low coefficient of friction, lower wear, good sliding characteristics, the transfer film created can protect the mating metal surfaces, suitable for rotating and oscillating movement, high chemical resistance, low absorption of water and swelling. The VSV-40 improved the friction and much good wear resistance over the common CSB-10 range under lubricated operation.

1. PTFE/Polymer fibres mixture thickness 0.01~0.03mm. Lead-free bearing layer provides an excellent initial transfer film, which effectively coats the mating surfaces of the bearing assembly, forming an oxide type solid lubricant film.
2. Sintered bronze powder thickness 0.20-0.35mm, provides max. thermal conductivity away from the bearing surface, also serves as a reservoir for the PTFE mixture.
3. Steel backing, provides high load carrying capacity, excellent heat dissipation.
4. Copper/Tin plating thickness 0.002mm, provides good corrosion resistance.

· Metal-Polymer Composite Bushing Material
· Steel back + Porous Bronze Sinter +
· PTFE + Fillers
 

Sliding layer PTFE + Fillers Porous Bronze Sinter Steel Backing

 
Tech. Data

 
* Depending on operating conditions
 

Technical data

Bearing forms available in standard dimensions
· Cylindrical bushes
· Flanged bushes
· Sliding plates
· Thrust washers
· Flanged washers
 
Metric bearings and imperial bushings made to order: Standard bushing forms in special sizes, half-bushings, stamped/deep drawn shapes, bearings with locating notches, lubricant holes and grooves, customized designs
 

 
VSB-40 is developed for high duty, oil lubricated, hydraulic applications...Automotivesuspensionstruts,absorbers guide bushing, hydraulic cylinders, gear pumps, motors, axial and radial piston pumps & motors.VSB-40 is designed mainly for using under lubricated conditions and it performs excellent wear resistance and low static/dynamic shockfriction coefficient.
 
 
 
 

 
START YOUR
PROJECTWITH AN APPLICATION ENGINEER 

DU Bushing, DU Bearing, Teflon Line Bearing, Ptfe Coated Bushing, DX Bush, DX Bearing, Self-Lubricating Bearing, Sliding Bearing, Bimetal Bush, Wrapped Bronze Bushing, Oiles Bush, Oiles Bearing, Cast Bronze Bearing, Oiles Wear Plate, Oiles Guide Rail, Pom Coated Bearing, Metal-Polymer Composite Bearing, Plain Bush, Supplier, Company

bushing catalog | Bushings Catalog (Plain Bearings Catalog)