Sleeve Bearing With Flange, Mm (JFM-121418-045) Plastic Plain Bearing, Polymer Plain Bearing, Plastic Bushing - Made In China (JFM-121418-045)

One of the main advantages of sliding bearings is that in dry running
with a low coefficient of friction and a very low tendency to creep, and
and very good wear resistance at low pressures.
At very low speeds, sliding bearings
at very low speeds, the low coefficient of friction and minimal crawling
is very important at very low speeds. Similarly, Flange Sleeve Bushings can be used in
sliding speeds greater than 1 m/s, static friction
Very low and no crawling.
Sliding bearings are resistant to weak alkalis, weak acids, as well as fuel
and all types of lubricants.
Due to its low water absorption, it can be used in humid
environments.
The sliding bearing is resistant to common cleaning agents used in the food industry.
The sliding bearing is resistant to all general cleaning agents used in the food industry.

Applications.
-Low wear on different shafts
-Low friction coefficient during dry running
-Reduced vibration
-Good chemical resistance
-Good performance even for soft shafts
-Low water absorption

JFM-1214-15,JFM-121418-045,JFM-121418-10,JFM-1218-08

Excellent wear resistance at room temperature; Very good wear resistance at medium temperatures; Excellent friction coefficients; Low moisture absorption

Sleeve Bearing With Flange, Mm

• Excellent wear resistance at room temperature
• Very good wear resistance at medium temperatures
• Excellent friction coefficients
• Low moisture absorption
• High media resistance
• Resistant to edge pressure
• Resistant to shocks and impacts
• Resistant to dirt and dust
• Mould resistant according to DIN EN ISO 846
• CO2 equivalent: per piece available
• 

EP plastic bushings of high-performance engineering plastic polymer bearings as the base material, through modification of polymer materials technology into high-strength fibers and specialty solid improvement in its internal grease integrated wear resistance; high strength fiber reinforced network structure strength of the material, the composite solid special grease allows EP plastic bearings with excellent self-lubricating properties and wear resistance. Whether it is a high durability requirements the automotive industry.

Learn more about self-lubricating plastic plain bearings from Viiplus, designed for maximum service life in extreme industrial conditions with very low cost.

EP series plastic bushings use high-performance engineering plastics as the base material. High-strength fibers and special solid lubricating greases are implanted inside them through polymer material modification technology to improve the comprehensive wear resistance; the high-strength fiber network structure strengthens The strength of the material and the combination of special solid lubricating grease make EP series plastic bushings have excellent self-lubricating performance and wear resistance. Whether it is the automotive industry with high durability requirements, high-speed applications, underwater applications, high temperature and anti-corrosion applications, or the food industry that requires compliance with FDA standards, Viiplus provides different solutions for global industries.

【JFM code sleeve bushing】
JFM-0304-05 JFM-0306-10 JFM-0405-03 JFM-0405-06 JFM-0507-05
JFM-0608-04 JFM-0608-06 JFM-0608-08 JFM-0608-10 JFM-0610-10
JFM-0810-038 JFM-0810-05 JFM-0810-06 JFM-0810-07 JFM-0810-08
JFM-0810-10 JFM-0810125-10 JFM-081014-10 JFM-081016-11
JFM-0812-06 JFM-1012-05 JFM-1012-09 JFM-1012-10 JFM-1012-12
JFM-1012-15 JFM-1012-18 JFM-101215-035 JFM-1113-05 JFM-1214-05
JFM-1214-07 JFM-1214-09 JFM-1214-12 JFM-1214-15 JFM-121418-045
JFM-121418-10 JFM-1218-08 JFM-1218-12 JFM-1218-20 JFM-1416-03
JFM-0304-05JFM-1416-10 JFM-1416-12 JFM-1416-17 JFM-141822-20
JFM-1517-09 JFM-1517-12 JFM-1517-17 JFM-1521-20 JFM-1618-17
JFM-1622-12 JFM-1622-15 JFM-1719-09 JFM-1719-21 JFM-1820-04
JFM-1820-12 JFM-1820-22 JFM-1922-36 JFM-2023-11 JFM-2023-15.5
JFM-2023-21 JFM-2026-15 JFM-202530-15 JFM-2026-20 JFM-2026-25
JFM-222532-08 JFM-2430-30 JFM-2528-06 JFM-2528-14.5 JFM-2528-21
JFM-252839-075 JFM-2532-20 JFM-2532-25 JFM-283235-07 JFM-3034-20
JFM-3034-26 JFM-3038-30 JFM-3539-12 JFM-3539-16JFM-3539-26
JFM-4044-20 JFM-4044-30 JFM-4044-40 JFM-4550-20 JFM-4550-50
JFM-5055-50 JFM-5560-50 JFM-6065-50 JFM-7075-50

Long-lasting, self-lubricating plastics, sleeve bearing with flange, mm

Maintenance-free plastic plain bearings

Basic Information

Plastic Bushings Feature

● The most common plastic bearing material. It is suitbale for the applications with working temperature not higher than 80℃. It is the prefereable material with good wear resistance and economic efficient for a new designation.

● Continuous working temperature: -40℃/+80℃;
● Very common; suitable for most of average and low load;
● Maintenance-free dry operation;
● Light wear against different shaft materials;
● Low friction.

Self-lubricating bushings, High-Quality Price Ratio B2B. Get Your Question Now! We Manufacture and Design Self-lubricating Bushings & Metal Polymer Bushing and so on.10+ years of experience, Advanced equipment, excellent product quality, and stable quality.

Nylon Bushing Wholesale, Bushing Suppliers Plastic bearings|Plastic plain bearings|Plastic bushings

Plastic Compound Bearings Plain Bearings Metric Cylindrical Bushes EPB Sliding Bearings Black Lubricating Bushes h9 H7 tolerances Dwg for IGUS Equv Bushes

Plastic Bushing Characteristics

VIIPLUS EPB bearings series material is a thermal mold character plastic processed by crystal engineering plastic as basic material with proper intensifier and lubricant. The rigidity and high-temperature engineer capability is greatly improved because of the use of intensifier, at the same time, the coefficient of thermal expansion, molding shrinking rate and wriggle capability decreases, consequently, the size stability is improved, and EPB series material range is enlarged and keeps the intrinsic anti-wear capability and anti-drug capability.

Plastic Bushing

Typical Applications