Bronze Bushing, Steering Case, Axle, Front And Rear

Provide You Best Self-lubricating Bearings Solution.

WB702 60x65x40 bronze bushings made to order!

Wieland B09 dimensions wieland bearings gleitlager bronze!

Replacement Parts Bushings, Dimensions of the tube for machined bushings OD up to 100 mm Wall thickness depending on OD

CuSn8P: Bronze highly resistant to load, high temperature, corrosion and
wear. Under heavy load, it requires a hardened shaft.
Application: Small-end bearings, joint bearings subject to impact load, standard alloy for wrapped bushings.

Composition (standard values)

Sleeve Bearings · Straight – Flange Sleeve Bearing(WF-WB700 & WB700)

The bearings are manufactured of a cold formable homogenous bronze, which because of this will obtain exceptional material properties. The execution of the flange permits that the bearing also can carry axial loads. The standard sizes are fitted with diamond-shaped lubrication indents on the bearing surface.

These indents serve as lubricant reservoirs I .a. to rapidly build up a lubrication film in the moment of start and therewith reduce the start friction. The properties of the WB700-material, together with the procedure of wrapping and calibration, make this type of bearing especially suitable for constructions, where medium or high loads and relatively slow movements are occurring

WB700 is a kind of bushes wrapped by bronze strip. The bronze is made as to the particular formulation with high specific and gravity, and on its surface may be incorporated with spherical or diamond-shaped indentations or/and oil grooves as required by customers. It is of high load capacity and long life, in place of traditional casting bronze bush. It is cheaper and more compact. It is widely applied in hoisting machines and other construction machines, automobiles, tractors, trucks, machine tools, and some mineral engines.

Advantages:

1. Lead-free and fully recyclable. Less expensive than a machined bushing.
2. Minimal space required.
3. Lighter in weight than machined bushing or roller bearing.
4. High stability under load, therefore particularly suitable for oscillating bearing.
5. Lubrication grooves are coined into the metal, and any shape desired is possible.
6. Grease depots for long-term lubrication.

■ WB700 Technical Data

WF-WB700 Flanged Bushing is a kind of slide bearing in split wrapped bushing. It is made of CuSn6.5 or CuSm.The bronze is made as a particular formulation with high specific and gravity.

WF-WB700 Flanged bushing offers the following additional advantages:

1. A single bushing and take both radial and axial forces.
2. A single bearing element is needed to replace both thrust washer and cylindrical bushing.
3. High stability.

4. No fixing of thrust washers.

Physical and Mechanical Properties:
 

Bushing, Steering Case, Axle, Front And Rear

Bushing Supplier. Add Equipment to your list. to find the parts that fit.

bushing products. A wide variety of bushing options are available to you,

Reliable One-Stop Bronze Bearing Solution Supplier