Sheet composite strips are precision-engineered materials that offer exceptional performance in various industrial applications. These strips are composed of (Polytetrafluoroethylene), a synthetic fluoropolymer known for its unique properties such as high chemical resistance, low friction coefficient, and exceptional heat resistance.

The standard dimensions of  sheet composite strips vary depending on the manufacturer and specific requirements. However, some common standard dimensions include:

Length: Typically, the lengths of  sheet composite strips range from several inches to several meters, depending on the application. Standard lengths are often sold in increments such as 1 meter, 2 meters, 5 meters, or 10 meters.

Width: The width of the strips can vary depending on the intended use. Common standard widths range from a few millimeters to several inches. Standard widths are often sold in increments such as 10mm, 20mm, 50mm, or 100mm.

Thickness: The thickness of sheet composite strips is an important factor that determines their strength and durability. Standard thicknesses range from a few tenths of a millimeter to several millimeters. Common thicknesses are sold in increments such as 0.5mm, 1mm, 2mm, or 5mm.

It is important to note that these are general standard dimensions, and actual dimensions may vary slightly depending on the manufacturer and specific product specifications. Therefore, it is always recommended to check with the manufacturer or supplier for exact dimensions and specifications before purchasing  sheet composite strips.

Sliding bearing bushings,  Sheet Composite Strips

Have more questions? Ready to buy Composite Strips? We can help with technical, sales, and product support.

Strips 500mm*200mm*0.75mm
Strips 500mm*200mm*1.00mm

If you are not sure about certain parameters of the sliding bearing bushings material strips, please let us know your inquiry and we are very happy to give you professional technical advice and support services. Our services are not limited to standardized self-lubricating bearings products, but also include specific OEM, design, and manufacturing based on the customer's industry and application scenarios to help customers create more business opportunities.

Plain bearing Strips hydraulic special Sliding bush PAS Strips Material information in detail  Strip Metric | VSB-40

Considering the working principal of oil pump and damper. Hydraulic bearing, Its performance is the same as  and can be is a substitute of  abroad.it shows its priority when working under high-frequency reciprocating motion with a big side force. covers a wide application in automobiles,motor damper, and oil cylinders etc.

SF-1D hydraulic special material is a material designed in combination with the working principle of oil cylinder and shock absorber. It is more wear-resistant under oil-free conditions. In addition to the advantages of SF-1P, this product is especially suitable for large reciprocating Tendency to the occasion.

VSB-40 Metal-Polymer Low Friction Plain Bearings

• Metal-polymer-composite material
• Seel + porous bronze sinter + RED modified
• self-lubricating low-maintenance

Metal-polymer-composite material Steel + porous bronze sinter + modified

Lubricated bearing material with good wear and friction performance over a wide range of load, speed and temperature conditions Particularly suitable for intermittent operation (reciprocating or oscillating movements)

Application

Automotive:

shock absorbers, door,
bonnet and tailgate hinges, steering columns,
clutches, gearbox selector fork guides, wiper
arms, power steering pumps, pedal bushes,
ABS equipment, etc.

Industrial:

Lifting equipment, hydraulic pumps and motors, pneumatic equipment, medical equipment, textile machinery, agricultural equipment, scientific equipment, drying ovens, office equipment, etc.

Availability

Ex stock: To order:
Cylindrical bushes, flanged bushes, t Non-standard parts trust
washers, flanged washers, and strip

Hydraulic special bearing especially suitable for reciprocating frequent occasions large lateral force.

Which can be used in automotive, motorcycle shock absorbers, and various hydraulic cylinders.

VSB-40  low friction bushings offer good wear and low friction performance over a wide range of loads, speeds, and temperatures in dry running conditions

· Very good performance in lubricated applications
· Good performance in greased applications
· Suitable for linear, oscillating and rotating movements
 
Suitable for dry running, low coefficient of friction, lower wear, good sliding characteristics, the transfer film created can protect the mating metal surfaces, suitable for rotating and oscillating movement, high chemical resistance, low absorption of water and swelling. The VSV-40 improved the friction and much good wear resistance over the common CSB-10 range under lubricated operation.

1. /Polymer fibers mixture thickness of 0.01~0.03mm. The lead-free bearing layer provides an excellent initial transfer film, which effectively coats the mating surfaces of the bearing assembly, forming an oxide type solid lubricant film.
2. Sintered bronze powder thickness 0.20-0.35mm, provides max. thermal conductivity away from the bearing surface also serves as a reservoir for the mixture.
3. Steel backing, provides high load carrying capacity, excellent heat dissipation.
4. Copper/Tin plating thickness 0.002mm, provides good corrosion resistance.

5. Steel + Bronze Powder + /Fibre

· Metal-Polymer Composite Bushing Material
· Steel back + Porous Bronze Sinter +
· + Fillers

 
Tech. Data

 
* Depending on operating conditions
 

Technical Data

Bearing forms available in standard dimensions

· Cylindrical bushes
· Flanged bushes
· Sliding plates
· Thrust washers
· Flanged washers

 
Metric bearings and imperial bushings made to order: Standard bushing forms in special sizes, half-bushings, stamped/deep drawn shapes, bearings with locating notches, lubricant holes and grooves, customized designs
 

 
VSB-40 is developed for high duty, oil lubricated, hydraulic applications...Automotivesuspensionstruts, absorbers guide bushing, hydraulic cylinders, gear pumps, motors, axial and radial piston pumps & motors.VSB-40 is designed mainly for use under lubricated conditions and it performs excellent wear resistance and low static/dynamic shock friction coefficient.