C86300 (SAE 430B) Manganese Bronze Bushing solid bushing, bronze with lubricant plugs embedded, DIN 1850/ISO 4379, Maintenance-free
C86300 Manganese Bronze (SAE 430B) is a high strength alloy used as bushings,sliding bearings,Valve stems and hydraulic cylinder sleeve bushes parts.
Contact Us to Inquire About Availability
C86300,C86200，C95400, SAE40, SAE660 aluminum bronze bushings stock，cast bronze bushings, manganese bronze , phosphorous bronze
VSB-50 is a self-lubricating bearing material that consists of a high-quality bearing bronze with pockets filled with solid lubricant and a thin film of solid lubricant over the bearing surface to aid the running-in process. VSB-50 maintenance-free bearings, without the need for lubrication with oil or grease are recommended for large bearings. have a low coefficient of friction.
The typical characteristics of
Suitable for low speed, heavy load or intermittent movement conditions, lubricating oil film can not form or maintain the occasion;
Suitable for work environment or mechanical structure restrictions, it is difficult to supply oil lubrication occasions;
Suitable for occasions where impact loads are easy to occur in the work;
Suitable for rotating, reciprocating, swinging and linear and other forms of movement and need to start frequently or under high load starting occasions;
Suitable for high or low temperature work, or the environment temperature range of large occasions;
Suitable for long maintenance cycle or high maintenance cost, require long service life of the bearing occasions;
Good corrosion resistance, can be used in seawater and other chemical liquids or gases and other corrosive media;
No water absorption, good dimensional stability, high mechanical strength, with good thermal conductivity;
Under the condition of medium load, medium speed, lubrication, mixed lubrication can be achieved, prolong the service life;
The product application
Water conservancy and hydropower industry:
Hydraulic machinery: hydraulic steel gate plane support slide, plane gate fixed wheel bearing, radial gate hinge bearing, hydraulic hoist bearing, pulley bearing, transmission wheel bearing;
Turbine: guide blade shaft sleeve (guide, guide, guide), wheel shaft sleeve, pin shaft sleeve (connecting rod pin, push and pull rod pin, relay piston pin), anti-wear ring plate (thrust ring), anti-wear block, control ring side tile, etc..
Metallurgical industry: continuous casting machine, die-casting machine, tension leveller, rolling mill, conveyor bearing, roll-cut shears (bilateral shears, fixed length shears on the skateboard), etc.
Other: mining machinery, ship machinery (anchor) for sliding parts, oil machinery, textile machinery, construction machinery, lifting transportation (lifting support shaft sleeve), vehicle production lines, auto mould, light industry, machinery.
Design Assistance | Material Selection | Component Geometry
Bearings and Componments
www.viiplus.com firstname.lastname@example.org www.bronzegleitlager.com
Contact Person: Miss. Tiffany
Tel: +86 18258386757