Pom Layer Sleeve Bushing,Bushing Manufacturer,Bushes Mfg,The Pom Layer Sleev Bushing is based on a composite material with 3 firmly bonded layers: steel as a base, spherical sintered bronze powder as an intermediate layer and modified POM as a lining layer. It is well suited for low speeds, harsh operating conditions and normal temperatures, it saves costs and extends its service life with the normal replacement of all copper bushes. POM bushings Suitable for rotational and vibrational movements, less maintenance requirements due to longer relubrication intervals, shorter wear,lower susceptibility to edge loading, no absorption of water and therefore no swelling, good damping behaviours, good resistance to shock loads.
POM 0.03-0.50mm, anti abrasion, low friction coefficient even no oil
given. The inside of the bearing are full of indentions, which need to be
filled with grease before installing.
Bronze powder layer, 0.2-0.35mm, high load capacity and anti abrasion,
good thermal conductivity, which also further strengthen the combination
of the POM layer and steel plate.
Low carbon steel, which improved,load capacity&thermal conductivity.
automobile chassis, Forging Machine, Metallurgical machinery, Mining machinery, Water conservancy machinery, Steel rolling industry.etc
Steel base+ Bronze powder+ POM
The product can be used under high load with low speed, rotation, oscillation and can also be applied in an environment without liquid lubricant which frequently switches with the load.
The part can operate without oil and will have a long service life if it gives oil.
The POM layer can be machined during installation, which benefits the coupling.
BM-2 bushing products are now mainly used in metallurgy machinery, mining industry, irrigation machinery, agricultural machinery, etc.