|Material:||CuSn8P (DIN 17662)||Bushing Area Of Use:||Hydraulic Cylinders, Construction Machines, Crane Construction, Agricultural Machines|
|Bronze Bushing Size:||ID50*OD55*65Flange*L50mm||Type:||E92F 5050 Bushing|
|Size:||Other Dimensional Tolerance Can Customize||Bushing Made In China:||Solid Bronze Bearings, Bronze Bearing, Lubrication Indents|
sintered self lubricating bushes,
self lubricating bronze bushings
Bushing sleeve forms made to order: cylindrical bushes with non-standard dimensions, flanged bushes, sliding plates, customized bearing designs
Bronze mesh material
Wrapped bushing, Bronze CuSn8P, DIN 1494 / ISO 3547, Low-maintenance
Solid bronze bearings with lubrication indents offer high load capacity, good wear resistance under rough conditions & low speeds. Consult china bushing sleeve supplier for a quote.
Tin bronze is a kind of copper alloy.
Bronze with tin as the main alloying element.Tin content is generally 3 ~ 14%, mainly used for making elastic components and wear - resistant parts.The tin content of deformed tin bronze is not more than 8%, and phosphorus, lead, zinc and other elements are sometimes added.Phosphorus is a good deoxidizer and improves fluidity and wear resistance.The machinability and wear resistance of tin bronze can be improved by adding lead, and the casting performance can be improved by adding zinc.This kind of alloy has higher mechanical properties, wear reduction properties and corrosion resistance, free cutting, good brazing and welding properties, small shrinkage coefficient, non-magnetic.The coatings of bronze bushing, shaft bushing and diamagnetic element can be prepared by wire flame spraying and arc spraying.Various sizes are available.With high strength, corrosion resistance and excellent casting properties, it has been widely used in various industrial sectors for a long time.
·Very good for rotation and linear motion.
·Low sensitivity in dirty and rough environment
·Good corrosion resistance medium
·Has a large wear depth, also suitable for rough machining.
(limit < 0,15 x wall thickness [mm])
·Even at low speeds, the sensitivity to impact loads and vibrations is low.
·Lubricate essential fats or oils regularly (lithium saponified fats are recommended)
·Lubricating holes are used as lubricant stores and dirt traps.
·A thin axle is available
·Extra high load capacity
·Good lubrication properties
·Wide temperature range
·Easy to assemble
|Material:||Cu – 91.3% Sn – 8.5% P – 0.2%|
|Standard:||Cu Sn8. DIN 17662. CW453K|
|Sliding layer (thickness):||Homogeneous|
|Tensile strength Rm:||450N/mm²|
|Yield strength Rp 0.2:||250N/mm²|
|Elongation in % A10:||0.4|
|Max. load static:||120 N/mm²|
|Max. load, dynamic:||40 N/mm²|
|Max. sliding speed (w.lubr.):||2.5 m/s|
|Pv-value, Mpa x m/s, kont / int:||2.8|
·Bushing inner-Ø after mountingH9
·Shaft tolerancef7 to h8
surface roughness Ra = 0,4 μm
minimum hardness > 200 HB
Hydraulic cylinders, construction machines, crane construction, agricultural machines
Tin Bronze Bushing is a low-maintenance Wrapped Tin Bronze Bushes Sliding Bearing, primary lubrication is necessary. Oil or grease lubrication is possible. Due to lubrication pockets lubrication clearances are reduced to a minimum.
Plain cylindrical bearings, flanged bearings, thrustwashers, slidingplates.
Agricultural machinery, truck cranes and construction machinery, suitable for impact loads
It is a sleeve material that does not require special care. Initial lubrication during installation is necessary, after which periodic lubrication with oil or grease is mandatory. Diamond pockets are an excellent lubricant store and keep maintenance to a minimum.
Wrapped Tin Bronze Bushes Sliding Bearing, CuSn8 tin-bronze alloy is a material, a rhombic hole for surface rolling, because as the role of a storage grease, it has good fatigue strength and load capacity, corrosion resistance, wear resistance. Widely used in agricultural machinery, construction machinery, construction machinery and other high speed at low speed.
The Wrapped Tin Bronze Bushes Sliding Bearing are wrapped with cold-formed homogeneous bronze (CuSn8) with exceptional material properties. Standard sizes are formed with diamond lubricating grooves on the bearing surface. The recesses serve as lubricant reservoirs, which quickly form a lubricating film at the beginning of the movement and then reduce working friction. These materials are suitable for use in construction and agricultural machinery.
TheWrapped Tin Bronze Bushes Sliding Bearing is encased in homogeneous bronze capable of forming cold, which will obtain exceptional material properties. The standard bearing is equipped with diamond-shaped lubrication cutouts on the bearing surface. These setbacks serve as lubricant reservoirs to quickly form a lubricating film in the starting movement and reduce starting friction. Typical application: widely applied in lifting machines and other construction machines, automobiles, tractors, trucks, machine tools and some mineral engines.
WE ARE A PROFESSIONAL
SELF-LUBRICATING BEARING MANUFACTURER & SUPPLIER
Welcome to contact us!
If you have any questions, please feel free to contact us,you are always welcome, thank you!
Contact Person: iris
Meterial: wrapped bushing, bronze or tin-plated steel (Carbon & POM)
Characteristic: Low-maintenance and maintenance-free wrapped sliding bearings
Application: Applications with high loading and high temperature which require a good chemical resistance. Plastic machines, piston pumps, compressors.
Standard: DIN 1494/ISO 3547