CuSn8 is characterized by the purity of the alloy with only a very low level of impurities. Wrapped bronze bearings are produced from strips that are subsequently wrapped and calibrated.
Bronze Material Plain Bearing Strips | CuSn8 or CuSn6.5 Metric Bronze Bushings Sheet Strip
Diamond Oil hole Copper sleeve flange sleeve in linear motion, VIIPLUS brand self-lubrication bearing with low noise, self-lubrication characteristics, is widely used in cylinder and automatic guide rail.
VIIPLUS Cylindrical bushing CuSn8 & CuSn6.5,flanged bearing and strip are available.Bronze bushing is a kind of wrapped self lubricating bearing. This type bearing including bronze bearing, bronze bearing with oil hole. We are leading export in china of Bimetal Bearing, Bronze Bearing, Sliding Bearing,Bush Bearing, Linear Bearing.
wrapped bronze bushing is made of tin-bronze CuSn8P with its surface punched with diamond oil sockets which are preserved for oil saving. It has good anti-fatigue, anti-erosion anti-abrasion and load capacity. The products are widely applied in conditions of heavy load but low running velocity, such as on agricultural, buiding and engineering machines.
Parameters FB092 bronze material is made of bronze material as the base. Before the thin-walled bearing is rolled into a thin-walled bearing, the oil-filled hole is evenly and orderly processed on the surface of the material. After the assembly, the grease is injected and the end face is sealed. At present, the material has been applied to medium and low speed applications such as conveyors, elevators, reeling machines, and leveling machines.
Material: CuSn8P0.3 or CuSn6.5P0. 1
Applicable temperature range: -100 ° C ~ 200 ° C
Maximum load pressure: 60N/mm2
Maximum sliding speed: 2.5m/s
VSB-22 Bronze CuSn8 with Lubrication 090 Strips, Slide paths
Bronze (090 Strips Material )
Wrapped Bronze Bearings (low-maintenance), used for heavy load applications, offered with lubrication pockets, grooves or thru holes, plain or flanged bearings and strip
· Bearing material made of solid bronze strip with indents for lubrication
· Good wear resistance, suitable for rough conditions
· Optimum performance under relatively high loads and low speeds
· 1.Easy for fitting and lubricating
· 2.High load capacity
· 3.Inner Diameter machineable parts are available against order
· 4.High level thermal conductivity
· 5.Minimum overall dimensions
· 6.Chemical resistance.
· Initial pre-lubrication at assembly required...
The bearings are wrapped from a cold formed homogenous bronze (CuSn8) with exceptional material properties. The standard sizes are fitted with diamond shaped lubrication indents in the bearing surface. These indents serve as lubricant reservoirs to rapidly build up a lubrication film at the start of movement and thereafter reduce the running friction. The material is suitable for construction and agricultural machinery applications.
STRUCTURE AND COMPOSITION
Bronze Bearings and Bronze Sleeve Bushings made of CuSn8 with Lubrication Indents
Sn 8 %
P < 0.05 %
Process fluid lubricated
Coefficient of friction
Coef. of thermal expansion
Bearing forms available in standard dimensions
· Cylindrical bushes
Bearing forms made to order: cylindrical bushes with non-standard dimensions, flanged bushes, sliding plates, customized bearing designs
This type of bushing is widely applied in hoisting machines and other construction machines, automobiles, tractors, trucks, machines tools and some mineral engines. It can be fabricated into bushes, half bearings, flanged bushes, taist washers, spherical bearing andsoon.