High precision high speed wear resistance thrust oilless Washer low noise
THRUST WASHER / ROUND / COMPOSITE / PTFE
Quality bad?Size is uncomplete?Tolerance is out of tolerance?delivery date is not on time?
VIIPLUS BEARING will help you slove them.
Features: small friction coefficient, good wear resistance & corrosion resistance, no oil lubrication
High precision & Small tolerance
Very low speed
PV max. hydrodynamic
Coefficient of thermalexpansion
Sliding Bearings Matters needing attention
The quality of bearing installation will affect the precision, life and performance of the bearing.Therefore, in the installation and use process, pay attention to the following points
Keep bearing and working environment clean
Clean the working area with clean tools or auxiliary tools. The bearing can not be opened until it is in use.
Keep the bearings clean during operation
Use appropriate tools
Installation should be good plastic not easy to fall off the auxiliary tools.
Attention should be paid before mounting the bearing
Fully inspect the shaft and bearing body, and determine whether the mating surface of shaft and bearing body has bump or bump, yes
Dust or mold sand on bearing housing surface, etc.To avoid collision during installation, the shaft
And the working surface of the bearing body shall be coated with a small amount of lubricating oil.
We suggest to use pressing and matching method, and do not use hammer and other tools to directly hit the bearing end face
Avoid bearing damage.Small batch installation, you can use the sleeve pressure bearing face, hammer beating sleeve, so that the balanced installation of the bearing in place.
Bearing forms available in standard dimensions
Metric bearings and imperial bushings made to order: Standard bushing forms in special sizes, half-bushings, stamped/deep drawn shapes, bearings with locating notches, lubricant holes and grooves, customized designs