China Bronze Gleitlager manufacturer

C86300 Manganese Bronze Bushing Graphite Plugs Inch Size | Sleeve Bushing for Hydro Mechanical Equipments

Product Details:
Place of Origin: Graphite Bearings Manufacturers
Brand Name: SANKYO,MISUMI,DAIDO,SELF LUBE,GGB,FIBRO STANDARD REPLACEMENT BEARING
Certification: DIN 1850/ISO 4379, UNITED STATES UNS STANDARD,C86300
Model Number: solid bushing, bronze with lubricant plugs embedded Maintenance-free
Payment & Shipping Terms:
Minimum Order Quantity: NEGOTIABLE
Price: Price Graphite Bushing Parts, (SAE 660) Leaded Tin Bronze Bearings,863 (SAE 430B) 862 (SAE 430A)Manganese Bronze
Packaging Details: BUSHING EXPORT CARTONS,WOODEN CASE, SPECIFY REQUIREMENTS
Delivery Time: FAST DELIVERY
Payment Terms: TT IN ADVANCE
Supply Ability: Bronze Bushings Online • Sliding Bearings Manufacturers • Self-lubricating Bushing Suppliers
Contact Now

Detail Information

Marerial: Bronze Graphite Bushing Size: Inch Size Bushings
Standard Size: C86300,C86200 Type: PLUGGED CAST BRONZE

Product Description

C-86200/C-86300 bush Machining Casting on centrifugal C86300 Manganese Bronze Cast bronze bearings with solid graphite lubrication

Manganese Bronze  with Graphite Plugs Inch Size C86300

Engineered for a Longer More Reliable Service Life

Material Grade : C-86200 or C-86300
Terms-
· Dimensional inspection report.
· Test certificate for mechanical properties (including hardness and density) of material.

Bronze can operate at high speeds under heavy loads, but require high shaft hardness and nonabrasive operating conditions. This alloy has excellent mechanical qualities and good corrosion resistance. This alloy is compromised of copper, manganese, aluminum and iron. This combination raises the tensile strength.

 

Bushings for Hydro Mechanical Equipments


Radial gates, Vertical gates, Stop logs, Penstock steel Liners, Mechanical Hoists, Hydraulic Hoists, Instrumentations, Gantry Cranes, Overhead Cranes, Reservoir Management Services with applications in...
Ware Storage
Flood Control
Hydro Electric Power Generation
Irrigation

 

 

Casting Copper Alloy

Type:Lead Free Brass

SELF-LUBRICATING OIL-LESS TYPE BUSHINGS

 

 

 

Chemical Composition mass/%

Cu

Sn

Al

Fe

Mn

Ni

Pb

Si

P

Zn

60-66

0.2

5.0-7.5

2.0-4.0

2.5-5.0

1

0.2

_

_

_

Mechanical properties

Tensile strength Mpa(Min)

Yield strength MPa(Min)

Elongation %

Brinell hardness(HB)

758

427

14

225

Note:

1,In Chemical Composition, Single values represent maximums.

2,Mechanical performance of hardness value is only for reference

 

 

C86300

Dimensions are in inches

Manganese Bronze with Graphite Plugs
Inch Sleeves

(ID x OD x L)

GRAPHITE BUSHINGS

1/2 x 3/4 x 1/2

GRAPHITE BUSHINGS

1/2 x 3/4 x 3/4

GRAPHITE BUSHINGS

1/2 x 3/4 x 1/2

GRAPHITE BUSHINGS

5/8 x 7/8 x 5/8

GRAPHITE BUSHINGS

5/8 x 7/8 x 3/4

GRAPHITE BUSHINGS

5/8 x 7/8 x 1

GRAPHITE BUSHINGS

5/8 x 7/8 x 1-1/4

GRAPHITE BUSHINGS

5/8 x 7/8 x 1-1/2

GRAPHITE BUSHINGS

3/4 x 1-1/8 x 5/8

GRAPHITE BUSHINGS

3/4 x 1-1/8 x 3/4

GRAPHITE BUSHINGS

3/4 x 1-1/8 x 1

GRAPHITE BUSHINGS

3/4 x 1-1/8 x 1-1/4

GRAPHITE BUSHINGS

3/4 x 1-1/8 x 1-1/2

GRAPHITE BUSHINGS

7/8 x 1-1/4 x 3/4

GRAPHITE BUSHINGS

7/8 x 1-1/4 x 1

GRAPHITE BUSHINGS

7/8 x 1-1/4 x 1-1/8

GRAPHITE BUSHINGS

7/8 x 1-1/4 x 1-1/4

GRAPHITE BUSHINGS

7/8 x 1-1/4 x 1-1/2

GRAPHITE BUSHINGS

1 x 1-3/8 x 3/8

GRAPHITE BUSHINGS

1 x 1-3/8 x 1/2

GRAPHITE BUSHINGS

1 x 1-3/8 x 5/8

GRAPHITE BUSHINGS

1 x 1-3/8 x 3/4

GRAPHITE BUSHINGS

1 x 1-3/8 x 1

GRAPHITE BUSHINGS

1 x 1-3/8 x 1-1/4

GRAPHITE BUSHINGS

1 x 1-3/8 x 1-1/2

GRAPHITE BUSHINGS

1 x 1-3/8 x 1-3/4

GRAPHITE BUSHINGS

1 x 1-3/8 x 2

GRAPHITE BUSHINGS

1 x 1-1/2 x 3/4

GRAPHITE BUSHINGS

1 x 1-1/2 x 1

GRAPHITE BUSHINGS

1 x 1-1/2 x 1-1/2

GRAPHITE BUSHINGS

1 x 1-1/2 x 2

GRAPHITE BUSHINGS

1-1/8 x 1-1/2 x 1

GRAPHITE BUSHINGS

1-1/4 x 1-5/8 x 1

GRAPHITE BUSHINGS

1-1/4 x 1-5/8 x 1-1/4

GRAPHITE BUSHINGS

1-1/4 x 1-5/8 x 1-1/2

GRAPHITE BUSHINGS

1-1/4 x 1-5/8 x 1-3/4

GRAPHITE BUSHINGS

1-1/4 x 1-5/8 x 2

GRAPHITE BUSHINGS

1-1/2 x 2 x 1-1/4

GRAPHITE BUSHINGS

1-1/2 x 2 x 1-1/2

GRAPHITE BUSHINGS

1-1/2 x 2 x 1-3/4

GRAPHITE BUSHINGS

1-1/2 x 2 x 2

GRAPHITE BUSHINGS

1-3/4 x 2-1/4 x 1-1/4

GRAPHITE BUSHINGS

1-3/4 x 2-1/4 x 1-1/2

GRAPHITE BUSHINGS

1-3/4 x 2-1/4 x 1-3/4

GRAPHITE BUSHINGS

1-3/4 x 2-1/4 x 2

GRAPHITE BUSHINGS

1-3/4 x 2-1/4 x 2-1/2

GRAPHITE BUSHINGS

1-3/4 x 2-1/4 x 4

GRAPHITE BUSHINGS

2 x 2-1/2 x 1-1/4

GRAPHITE BUSHINGS

2 x 2-1/2 x 1-1/2

GRAPHITE BUSHINGS

2 x 2-1/2 x 2

GRAPHITE BUSHINGS

2 x 2-1/2 x 2-1/2

GRAPHITE BUSHINGS

2 x 2-1/2 x 3

GRAPHITE BUSHINGS

2-1/2 x 3 x 3

GRAPHITE BUSHINGS

3 x 3-1/2 x 4

GRAPHITE BUSHINGS

3 x 3-5/8 x 3

GRAPHITE BUSHINGS

3-1/2 x 4-1/8 x 2

GRAPHITE BUSHINGS

3-1/2 x 4-1/8 x 3

GRAPHITE BUSHINGS

3-1/2 x 4-1/8 x 4

GRAPHITE BUSHINGS

4 x 4-3/4 x 2

GRAPHITE BUSHINGS

4 x 4-3/4 x 3

GRAPHITE BUSHINGS

4 x 4-3/4 x 4

GRAPHITE BUSHINGS

5 x 6 x 3

GRAPHITE BUSHINGS

5 x 6 x 4

 

Graphited bearings should be soaked in lubricant prior to application. The graphite absorbs the lubricant, which is then transferred to the shaft when heated by the shaft motion. This action provides oil needed to lubricate but not in sufficient quantity to cause leakage at the bearing ends. The oil is re-absorbed by the graphite when motion ceases.

 

 

Plug graphiting is accomplished by drilling a rowed, staggered hole configuration through the bearing wall and pressing graphite into these holes and hard baking. The size and number of drilled holes and the number of rows is determined by the bearing length and diameter.

  • Inch Sleeves

  • Metric Sleeves

  • Metric Flanges

  • Metric Washers

Solid self-lubricating bearing with graphite plug insert | Graphite copper sleeve bushings

Graphite Plugged Bronze Bushings are all self-lubricating and maintenance free. These bushings are machined out of continuous cast bronze and plugged with solid lubricant plugs. A bushing and it's mating surface should always be seperated by a film of lubricant.Many of VIIPLUS’s components use graphite. Here is what you need to know about it. Graphite is ordinary carbon in a highly unusual form, a two-dimensional crystal. Think of it as a one-atom thick sheet. A piece of graphite is a stack-up of these sheets. A graphite pencil lead feels oily because these one-atom thick sheets are very slippery.

 

  • Wear Plates

  • Wear Strips

  • Bushings

  • Slide Assemblies

  • Guide Components

C86300 Manganese Bronze Bushing Graphite Plugs Inch Size | Sleeve Bushing for Hydro Mechanical Equipments

 

Self Lubricating Graphite Plugged Bronze Sleeve Bushing
Plug Graphite Sleeve Bushing

 

 

         

  • Inch Sized Bushings

  • Metric Sized Bushings

 

 

MATERIAL


C86300 Manganese Bronze

 


C86300 Typical applications include slow speed heavy duty load bearings, gears, cams and hydraulic cylinder parts.continuous cast manganese bronze is a high strength, non-heat treatable copper alloy intended for use in applications requiring a good combination of outstanding wear characteristics and high bearing strength for heavy loads and slow speeds.

 

 

Bronze sleeve bearings flanged bronze bushings for sale

 

C86300 Maganese Bronze Graphite Bushings

ELEMENT

CONTENT (%)

Copper, Cu

60.0-68.0

Lead, Pb

≤0.2

Tin, Sn

≤0.2

Zinc, Zn

22~28

Iron, Fe

2.0-4.0

Aluminium, Al

5.0-7.50

Manganese, Mn

2.5-5.0

 

 

C86200 Maganese Bronze Graphite Bushings

ELEMENT

CONTENT (%)

Copper, Cu

60.0-68.0

Lead, Pb

≤0.2

Tin, Sn

≤0.2

Zinc, Zn

22~28

Iron, Fe

2.0-4.0

Aluminium, Al

3.0-4.90

Manganese, Mn

2.5-5.0

 

PERFORMANCE

 

Graphite Plugged Cast Bronze Bushings can be utilized where heavy loads must be supported at low to medium speeds

 

The Plug Graphite Cast Bronze Bushing is able to withstand high temperatures up to 570 F

The self-lubricating feature allows bearings to be used where oiling is difficult, expensive to implement, and where grease/oil cannot be used. Excellent lubrication is achieved even under high loads at low speeds.

Self lubrication with specially embedded solid lubricants reduces friction. Coefficient of Friction: 0.04 to 0.2 

 

 

 

TECHNICAL DATA

 

Grade

50#

50S1

50S2

50S3

650S5

Material

CuZn25AI5Mn4Fe3

CuSn5Pb5Zn5

CuAI10Ni5Fe5

CuSn12

CuZn25AI5Mn4Fe3

Density

8

8.9

7.8

8.9

8

Hardness

≥210

≥70

≥150

≥75

≥235

Tensile strength

≥750

≥250

≥500

≥270

≥800

Yield strength

≥450

≥90

≥260

≥150

≥450

Elongation

≥12

≥13

≥10

≥5

≥8

Coefficient o linear expansion

1.9×10-5/℃

1.8×10-5/℃

1.6×10-5/℃

1.8×10-5/℃

1.9×10-5/℃

Max.Temp.

-40~+300℃

-40~+400℃

-40~+400℃

-40~+400℃

-40~+300℃

Max.dynamic load

100

60

50

70

120

Max.speed(Dry)

15

10

20

10

15

N/mm²*m/s(Lubrication)

200

60

60

80

200

Compression deformation

< 0.01 mm

< 0.05mm

< 0.04mm

< 0.05mm

< 0.005mm

 C86300 Manganese Bronze Bushing Graphite Plugs Inch Size | Sleeve Bushing for Hydro Mechanical Equipments

 

APPLICATIONS

Bushings for Construction Equipment, Boom Link Bushings for Power Shovels, Toggle Link & Guide Bushings for Injection Mold Machines, Steel Mill Equipment, Furnace Dragouts, Drying Equipment, Roasters, Press Dies, Assembly Lines, Hydro-Electric Structures, Winches, Hoisting Equipment, Tire and Paper Mill Machinery and Many Other Industrial Applications.

Get in touch with us

Enter Your Message

You Might Be Into These