500SP Oilless Bronze Bushing (SPB) from VIIPLUS CHINA, offers free CAD downloads, prompt lead times, competitive pricing, and no minimum order quantity. Purchase today!.

bronzegleitlager.com is your trusted carbon graphite bushings manufacturer. Whatever your needs, we can custom design our bushings for your needs.

Self Lubricating Bush Bearings Astm B271 Alloy No C86300 (400 X 470 X 750)

• Advantages of Slide Elements:
• Maintenance free
• ※ Wear resistant
• ※ Low frictional resistance
• ※ Resistant against temperatures up to
• approx. 300℃ (approx.572oF)
• ※ No impurity through discharge of lubrication
• ※ Environmentally friendly
• ※ Corrosion resistant
• ※ Insensitive to impact stress
• ※ Specially suited for oscillating slide motions
• ※ Stick, slip free sliding
• ※ Long life

ASTM B271 Alloy Graphite Plugged Bushings NO C86300 ( 400 X 470 X 750 )

VIIPLUS offers C86300 Manganese Bronze bushings It is a self-lubricating bearing material that consists of a high quality bearing bronze with solid lubricant pockets.

Manganese Bronze  with Graphite Plugs Inch Size C86300

Chemical Composition:
(%max., unless shown as range or min.)

Applications for C86300 Manganese Bronze Bearings

The C86300 Bronze bushings is used in a variety of applications. Typical uses for this alloy are: Extra heavy duty, high strength alloy. Large valve stems bushing, gears bearing, cams bushes, slow-speed heavy-load bearings, hydraulic cylinder bushingparts.

Bronze can operate at high speeds under heavy loads, but require high shaft hardness and nonabrasive operating conditions. This alloy has excellent mechanical qualities and good corrosion resistance. This alloy is compromised of copper, manganese, aluminum and iron. This combination raises the tensile strength.

Bushings for Hydro Mechanical Equipments

Radial gates, Vertical gates, Stop logs, Penstock steel Liners, Mechanical Hoists, Hydraulic Hoists, Instrumentations, Gantry Cranes, Overhead Cranes, Reservoir Management Services with applications in...
Ware Storage
Flood Control
Hydro Electric Power Generation
Irrigation

Casting Copper Alloy

Type:Lead Free Brass

Self-Lubricating Oil-Less Type Bushings

Engineered for a Longer More Reliable Service Life

Graphited bearings should be soaked in lubricant prior to application. The graphite absorbs the lubricant, which is then transferred to the shaft when heated by the shaft motion. This action provides oil needed to lubricate but not in sufficient quantity to cause leakage at the bearing ends. The oil is re-absorbed by the graphite when motion ceases.

Plug graphiting is accomplished by drilling a rowed, staggered hole configuration through the bearing wall and pressing graphite into these holes and hard baking. The size and number of drilled holes and the number of rows is determined by the bearing length and diameter.

• Inch Sleeves

• Metric Sleeves

• Metric Flanges

• Metric Washers

Solid self-lubricating bearing with graphite plug insert | Graphite copper sleeve bushings

Graphite Plugged Bronze Bushings are all self-lubricating and maintenance free. These bushings are machined out of continuous cast bronze and plugged with solid lubricant plugs. A bushing and it's mating surface should always be seperated by a film of lubricant.Many of VIIPLUS’s components use graphite. Here is what you need to know about it. Graphite is ordinary carbon in a highly unusual form, a two-dimensional crystal. Think of it as a one-atom thick sheet. A piece of graphite is a stack-up of these sheets. A graphite pencil lead feels oily because these one-atom thick sheets are very slippery.

• Wear Plates

• Wear Strips

• Bushings

• Slide Assemblies

• Guide Components

Self Lubricating Graphite Plugged Bronze Sleeve Bushing
Plug Graphite Sleeve Bushing

• Inch Sized Bushings

• Metric Sized Bushings

Material

C86300 Manganese Bronze
C86300 Typical applications include slow speed heavy duty load bearings, gears, cams and hydraulic cylinder parts.continuous cast manganese bronze is a high strength, non-heat treatable copper alloy intended for use in applications requiring a good combination of outstanding wear characteristics and high bearing strength for heavy loads and slow speeds.

Bronze sleeve bearings flanged bronze bushings for sale

Performance

Graphite Plugged Cast Bronze Bushings can be utilized where heavy loads must be supported at low to medium speeds

The Plug Graphite Cast Bronze Bushing is able to withstand high temperatures up to 570 F

The self-lubricating feature allows bearings to be used where oiling is difficult, expensive to implement, and where grease/oil cannot be used. Excellent lubrication is achieved even under high loads at low speeds.

Self lubrication with specially embedded solid lubricants reduces friction. Coefficient of Friction: 0.04 to 0.2 

Technical Data