Copper Sleeve oil groove bearings Bi-metal Bulldozers Driven wheel & supporting Bush Standard Size plain bearings 

Bimetal Sleeve Stell Bronze Bushing Inch Size Online For Trunion Shaft,King Pin,Poston Pin,Connecting Rod,Rocker Arm,Leaf Spring,Cam Shaft,Crank Shaft,Track Roller,Carrier Roller,Idler Etc

Engineering machinery bushing & bronze bearings

Especially equipment operating in harsh mines and fields;Such as excavator arm bearing sleeve, bulldozer copper sleeve, chassis walking mechanism, hydraulic cylinder oil pump.VIIPLUS developed shock-resistant, dust-resistant, high-strength self-lubricating bearing, which not only solves the problem of lubrication but also reduces the noise and extends the service life.

Bimetal bearing sliding bearing Multi-layer Bearings Plain bearings with resin sliding surface on thin back steel.
Demonstrate superior sliding peformance, wear resistance and thermal conductivity.

Bimetal bearing, is a low carbon steel plate as the matrix material, the surface sintered CuPb10Sn10 or CuSn6Zn6Pb3 material of steel and copper alloy products.The product is the most powerful bearing capacity in the double-alloy bearing, the balance bridge bushing and gasket of the heavy truck;Driven wheel and supporting wheel of bulldozer;Automobile steel plate bushing, all USES this product.It is a kind of high load and low speed sliding bearing which is widely used.

A bimetal bearing & bushings is positioned on the driven shaft and in an internal hole of the driven wheel.

Drive wheel shaft sleeve bushing,The longer bimetal bronze rod bushing provides a maximum load bearing support.Exposed to elevated temperatures with some finishes intact or bushings installed.

Sliding bearings Steel with bronze powder bimetal bearing | VSB-80

Bi-metal Self-lube bearing Standard Size plain bearings DEVA-BM oiling bearing

China Bimetal self-lubricating bearing is a kind of bimetal sliding bearing which is made by special technology with steel plate as the matrix and copper alloy material containing solid lubricant as the wear-resisting layer on the surface.

Material

CuPb10Sn10, CuSn6Zn6Pb3, CuPb24Sn4, CuPn30, AlSn20Cu

Description

JF800 bimetallic bearing is steel back as the matrix, surface sintered copper, tin alloy, rolled rolling bearings, standard alloy materials are: CuPb10Sn10, CuSn6Zn6Pb3, CuPb24Sn4, CuPn30, AlSn20Cu.Since the base plate is made of low carbon steel, the machining accuracy of the outer diameter of the shaft sleeve is guaranteed. Moreover, there is no need for screw fixation after the product is loaded into the seat hole. Interference fit can be relied on to prevent the appearance of external circle.The change of the chemical composition of the alloy on the inner surface can meet the requirements of different bearing pressure, different service temperature and different sliding speed. The oil groove with different structure is designed for the friction surface in the production, and the oil cavity can meet the requirements of different ways of oiling and prevent the phenomenon of axle biting.

Characteristic

Steel backing gives exceptional high load carrying capacity, excellent heat dissipation. Sintered bronze powder gives good wear resistance and excellent load carrying capacity . Copper plating has good corrosion resistance.

Typical application

VSB-80 JF800 bimetallic applications, must be designed with oil lubrication conditions, suitable for high load and low speed rotation, swing motion.At present, it has been widely used in automobile balance bridge, spring plate seat hole, brake shoes, steering knuckles, motion connecting rod, punch sliding parts, bulldozer support, heavy driving wheel, gear box, oil pump, cylinder, engine, clutch and so on.Also widely used in mining machinery, turbo - car, construction machinery, agricultural machinery, steel rolling machinery and so on.

Technical Data

• Fork lifts

• Pallet Trucks

• Cranes

• Excavators

Technische Daten

• Wrapped composite sliding bearing

• Copper-plated or tin-plated steel / bronze

• Low-maintenance

• With lubrication pockets

Properties

• For high load capacity and oscillating movement, as well as for rough operation and temperature load. Long-run lubrication because of lubricant storage.

Materials

• erialSteel copper-plated / tin-plated

• Sliding layerCuPb10Sn10

Tolerance Details

• Housing ØH7

• Bushing inner-Ø after mountingH9

• Shaft tolerancef7 to h8

Maintenance

• is a low-maintenance composite sliding bearing, but primary lubrication is necessary. Oil or grease lubrication is possible. Due to solid lubricant storages, lubrication clearances are reduced to a minimum!

CAPTION

Special dimensions are available on request

Send us an online enquiry

You can use our “Enquiry Form” to get in touch with us. One of our sales team will contact you immediately.

OILES Multi Layered Bearings refer to plain bearings of thin walled with self-lubricating functions.
They are high performance, high quality, lubrication-free and maintenance-free bearings for various industries.

Cylindrical Bushings Cylindrical
Bushings Flanged Bushings Flanged
Bushings Thrust Washer Thrust
Washer Thrust Plate Thrust
Plate Bar for Machining Bar for
Machining Plate for Machining Plate for
Machining Tube for Machining Tube for
Machining other Other